AC Mains (85-264V AC)
Industrial Grade 5V 5A Ac-Dc Power Module
概要
An industrial-grade enclosed 5V DC power supply module capable of delivering over 5A from AC mains with robust protection features.
salamat mominシステムアーキテクチャ
POWER
- EMI_FILTER → AC_RECTIFICATIONPowerFiltered AC mains input to bridge rectifier
- AC_RECTIFICATION → POWER_STAGE_FLYBACKPowerHigh-voltage DC bus to primary flyback switch
- POWER_STAGE_FLYBACK → SECONDARY_RECTIFICATION_SRPowerGalvanically isolated energy transfer via high-frequency transformer
- SECONDARY_RECTIFICATION_SR → PROTECTION_CIRCUITRYPowerRegulated 5V output routed through protection and current sensing
- SECONDARY_RECTIFICATION_SR → FEEDBACK_REGULATIONPowerOutput voltage sensing for secondary regulation feedback
- FEEDBACK_REGULATION → POWER_STAGE_FLYBACKDigitalIsolated feedback signal across barrier to primary controller
部品表（BOM）
| 型番 | タイプ | 部品 | メーカー | パッケージ | 数量 | データシート | 一致 |
|---|---|---|---|---|---|---|---|
| S10K275 | POWER | EPCOS S10K275 Varistor & Dual-Stage CM Choke Surge protection, lightning suppression, and conducted EMI filtering for 85-264V AC input. | EPCOS | Disc 10mm | 1 | 一致済み | |
| GSIB6A60/51-E3 | POWER | GSIB6A60 Bridge Rectifier & Rubycon MXV Bulk Capacitors Rectifies AC mains to high-voltage DC and provides hold-up time across universal input range. | VISHAY | R-PSFM-T4 | 1 | 一致済み | |
| InnoSwitch3-ED | POWER | Power Integrations INN3162C-SF InnoSwitch3-ED Primary switch, high-voltage startup, and primary controller with FluxLink feedback isolation. | Power Integrations | — | 1 | 保留中 | |
検討された代替品2件を表示projects.detail.aiVerified | |||||||
| InnoSwitch3-ED | POWER | InnoSwitch3-ED Integrated SR Controller & Low RDS(on) N-MOSFET Synchronous rectification on the secondary side to eliminate diode forward-voltage drop losses. | Infineon, Onsemi | — | 1 | 保留中 | |
検討された代替品2件を表示projects.detail.aiVerified | |||||||
| TL431AIDBV | POWER | TL431 Shunt Regulator & FluxLink Feedback Secondary-side regulation sensing 5V output to maintain tight line/load regulation (+/-1%). | Texas Instruments | — | 1 | 一致済み | |
| INN3162C-H101-TL | POWER | Overcurrent, Short-Circuit, OVP & Thermal Shutdown Protection Provides latching or auto-restart protection against fault conditions in harsh industrial environments. | Power Integrations | 24-PowerSMD Module (0.425", 10.80mm Width), 17 Leads | 1 | 一致済み | |
検討された代替品3件を表示projects.detail.aiVerified | |||||||
| GAP PAD TGP 1000VO | POWER | Conduction-Cooled Potted Enclosure & Thermal Interface Pads Maximizes heat dissipation from high-dissipation components to the metallic brick chassis without fans. | Bergquist / Henkel, Laird, Dow Corning / Dowsil, MG Chemicals | — | 1 | 保留中 | |
検討された代替品3件を表示projects.detail.aiVerified | |||||||
組み立てガイド
3-5 hoursAdvanced
1
Procurement & Preparation
- Procure all raw BOM components including EPCOS S10K275 Varistor, GSIB6A60 bridge rectifier, Rubycon MXV bulk capacitors, Power Integrations INN3162C-SF, TL431AIDBV, and GAP PAD TGP 1000VO thermal interface pads.
- Inspect the dual-stage common-mode chokes and verify PCB footprints for the universal 85-264V AC input and 5V output rails.
2
Hardware Assembly & Wiring
- Solder the input EMI filter stage including the EPCOS S10K275 varistor and dual-stage common-mode chokes to the primary side of the PCB.
- Mount and solder the GSIB6A60 bridge rectifier and Rubycon MXV bulk capacitors to establish the high-voltage DC bus (HV+, HV-).
- Install the Power Integrations INN3162C-SF primary controller and flyback transformer, ensuring the transformer primary (TRANS_PRI) and secondary (TRANS_SEC) windings are properly connected.
- Assemble the secondary rectification stage featuring integrated SR controllers and low RDS(on) N-MOSFETs, linking to the TL431 shunt regulator and feedback network.
- Apply GAP PAD TGP 1000VO thermal interface pads to high-dissipation components and secure the PCB assembly into the potted metallic brick enclosure for conduction cooling.
3
Firmware Setup
- Configure internal controller parameters and verify default latching/auto-restart fault protection profiles for overcurrent, short-circuit, OVP, and thermal shutdown.
4
Testing & Calibration
- Perform initial dielectric withstand (Hi-Pot) testing between primary and secondary circuits across the isolation barrier.
- Connect universal AC mains (85-264V AC) and apply full resistive load (>5A) to the 5V output rail while measuring line and load regulation.
- Trigger fault conditions (short-circuit, overvoltage, and overtemperature) to verify that protection circuitry correctly engages latching or auto-restart behavior.
ドキュメント
Industrial Grade 5V 5A Ac-Dc Power Module
An industrial-grade enclosed 5V DC power supply module capable of delivering over 5A from AC mains with robust protection features.
Executive Summary
This reference design defines the system architecture, critical component candidates, risk register, and validation path for Industrial Ac-Dc Power Supply. It is a system-level design deliverable; verify critical claims with manufacturer evidence and prototype testing before production release.
Design Overview
Requirements Coverage
| Requirement | Architecture coverage | Status |
|---|---|---|
| AC mains input conversion (85-264V AC) | Pending validation | Needs verification |
| High current regulated 5V DC output (5A or more) | Pending validation | Needs verification |
| Overcurrent and short-circuit protection | Pending validation | Needs verification |
| Robust industrial-grade filtering and thermal management | Pending validation | Needs verification |
| Enclosed brick/module form factor | Pending validation | Needs verification |
| Item | Details |
|---|---|
| Product Type | Industrial Ac-Dc Power Supply |
| Key Functions | AC mains input conversion (85-264V AC), High current regulated 5V DC output (5A or more), Overcurrent and short-circuit protection, Robust industrial-grade filtering and thermal management, Enclosed brick/module form factor |
| Power Source | AC Mains (85-264V AC) |
| Connectivity | |
| Size | Compact enclosed module (brick/module style) |
| Environment | industrial |
| Difficulty | Advanced |
| Est. Time | 3-5 hours |
System Architecture
Power Topology: AC Mains (85-264V) -> EMI Filter -> AC Rectification & Bulk Capacitors -> Isolated Flyback Converter (InnoSwitch3-ED) -> Secondary Synchronous Rectification -> 5V DC (>=5A) Output with SSR and Overcurrent Protection.
Module List
| Module ID | Type | Name | Function | Voltage |
|---|---|---|---|---|
| EMI_FILTER | POWER | EPCOS S10K275 Varistor & Dual-Stage CM Choke | Surge protection, lightning suppression, and conducted EMI filtering for 85-264V AC input. | 230V AC |
| AC_RECTIFICATION | POWER | GSIB6A60 Bridge Rectifier & Rubycon MXV Bulk Capacitors | Rectifies AC mains to high-voltage DC and provides hold-up time across universal input range. | 310V DC |
| POWER_STAGE_FLYBACK | POWER | Power Integrations INN3162C-SF InnoSwitch3-ED | Primary switch, high-voltage startup, and primary controller with FluxLink feedback isolation. | 310V DC |
| SECONDARY_RECTIFICATION_SR | POWER | InnoSwitch3-ED Integrated SR Controller & Low RDS(on) N-MOSFET | Synchronous rectification on the secondary side to eliminate diode forward-voltage drop losses. | 5V DC |
| FEEDBACK_REGULATION | POWER | TL431 Shunt Regulator & FluxLink Feedback | Secondary-side regulation sensing 5V output to maintain tight line/load regulation (+/-1%). | 5V DC |
| PROTECTION_CIRCUITRY | POWER | Overcurrent, Short-Circuit, OVP & Thermal Shutdown Protection | Provides latching or auto-restart protection against fault conditions in harsh industrial environments. | 5V DC |
| THERMAL_MANAGEMENT | POWER | Conduction-Cooled Potted Enclosure & Thermal Interface Pads | Maximizes heat dissipation from high-dissipation components to the metallic brick chassis without fans. | N/A |
Power Tree and Signal Interfaces
| From | To | Type | Interface / rail | Voltage |
|---|---|---|---|---|
| EMI_FILTER | AC_RECTIFICATION | power | Power | 85-264V AC |
| AC_RECTIFICATION | POWER_STAGE_FLYBACK | power | Power | 310V DC |
| POWER_STAGE_FLYBACK | SECONDARY_RECTIFICATION_SR | power | Power | Transformer Secondary |
| SECONDARY_RECTIFICATION_SR | PROTECTION_CIRCUITRY | power | Power | 5.0V DC |
| SECONDARY_RECTIFICATION_SR | FEEDBACK_REGULATION | power | Power | 5.0V DC |
| FEEDBACK_REGULATION | POWER_STAGE_FLYBACK | data | Digital | Isolated Control |
Design Schemes
InnoSwitch3-ED Integrated Flyback with Synchronous Rectification ★
Utilizes Power Integrations InnoSwitch3-ED with FluxLink isolation and secondary SR for high efficiency and compact brick enclosure.
Trade-offs: Highest integration and efficiency with lower component count compared to discrete controller + external MOSFET schemes, perfectly tailored for 25W+ industrial 5V/5A brick modules.
Discrete Controller with External MOSFET and Secondary SR
Employs TI UCC28740 primary controller with an external high-voltage CoolMOS and dedicated secondary SR controller.
Trade-offs: Offers flexible sourcing of high-voltage transistors and controllers at the expense of a larger bill of materials and slightly higher board space.
Key IC selection
Primary Switch and Controller
- Need: Switch high-voltage rectified DC safely with integrated high-voltage startup and isolated feedback interface for universal AC input.
- Class: Offline Flyback switcher IC with integrated primary MOSFET and safety-rated isolation link
- Shortlist: Power Integrations InnoSwitch3-ED family, ON Semiconductor offline PWM controller + external MOSFET
- Pick: Select based on peak primary current rating, RDS(on) requirements for universal 85-264V AC input, and package thermal characteristics.
Synchronous Rectification MOSFET
- Need: Minimize secondary conduction losses at 5V/5A+ output to meet high efficiency and thermal targets without bulky heatsinks.
- Class: Low RDS(on) N-Channel Power MOSFET optimized for synchronous rectification
- Shortlist: Infineon OptiMOS 5 series, Texas Instruments CSD series low-voltage power MOSFETs
- Pick: Select lowest RDS(on) and gate charge combination in a compact package matching the secondary SR controller drive capability.
Bulk Hold-up Capacitors
- Need: Provide adequate energy storage to maintain output regulation during AC dropouts across universal input range.
- Class: High-voltage long-life electrolytic capacitors with high ripple current capability
- Shortlist: Rubycon MXV series, Nichicon LS series
- Pick: Select voltage rating >= 400V, capacitance calculated for minimum hold-up time at full 25W+ load, and 105C temperature rating.
Risk register
| ID | Area | Severity | Detail | Mitigation |
|---|---|---|---|---|
| r1 | thermal | high | Conduction-cooled potted brick design traps heat from the primary power stage, transformer, and secondary SR MOSFET, risking localized hot spots and exceeding capacitor temperature ratings. | Perform comprehensive thermal simulation and prototype thermocouple testing at maximum ambient temperature (85C) to verify internal component derating and potting compound thermal conductivity. |
| r2 | emi | med | High di/dt and dv/dt switching from the primary flyback switch and secondary SR MOSFET at 5A output can violate CISPR 32 Class B conducted and radiated EMI limits. | Optimize PCB layout for minimum high-frequency loop areas, tune snubber circuits across the primary transformer winding and secondary MOSFET, and ensure proper placement of the dual-stage CM choke. |
| r3 | power | high | Cross-regulation and transient load response during sudden 0% to 100% load steps on the 5V rail may cause voltage overshoots or undershoots due to trace impedances and output capacitor ESR. | Select low-ESR ceramic and solid polymer output capacitors in parallel, and optimize the secondary-side compensation network around the TL431 and FluxLink feedback loop. |
Bring-up and Validation Plan
- Power-off inspection and rail resistance checks
- Current-limited first power-up; verify every rail before enabling loads
- Validate interfaces and timing one subsystem at a time
- Run thermal, fault-injection, EMC pre-scan, and endurance tests for the target environment
Key Components
4/7 modules matched to real parts. See the BOM tab for the full component table.
EPCOS S10K275 Varistor & Dual-Stage CM Choke (S10K275)
The candidate MPN 'S10K275' matches the primary MPN and the manufacturer 'EPCOS' is in the preferred list (TDK/EPCOS).
GSIB6A60 Bridge Rectifier & Rubycon MXV Bulk Capacitors (GSIB6A60/51-E3)
The candidate GSIB6A60/51-E3 matches the primary MPN GSIB6A60 and is manufactured by Vishay, which is one of the preferr
Power Integrations INN3162C-SF InnoSwitch3-ED (InnoSwitch3-ED)
Web recommendation: InnoSwitch3-ED (not in ES)
InnoSwitch3-ED Integrated SR Controller & Low RDS(on) N-MOSFET (InnoSwitch3-ED)
Rejected weak/wrong-class catalog hits; using web recommendation: InnoSwitch3-ED
TL431 Shunt Regulator & FluxLink Feedback (TL431AIDBV)
The candidate TL431AIDBV from Texas Instruments matches the primary MPN (TL431) and preferred manufacturer, and belongs
Overcurrent, Short-Circuit, OVP & Thermal Shutdown Protection (INN3162C-H101-TL)
The candidate INN3162C-H101-TL matches the primary MPN family INN3162C-SF with an acceptable ordering/package suffix, co
Conduction-Cooled Potted Enclosure & Thermal Interface Pads (GAP PAD TGP 1000VO)
Rejected weak/wrong-class catalog hits; using web recommendation: GAP PAD TGP 1000VO
Build Summary
- Difficulty: Advanced
- Estimated time: 3-5 hours
- Tools required: SMT Pick and Place Machine, Reflow Oven, Selective Soldering Machine, Soldering Iron, Hi-Pot Tester, Electronic DC Load
See the Build tab for the full step-by-step assembly guide.
Evidence and Limitations
- Confirm part parameters, certifications, and compatibility against current manufacturer documents.
- Treat industry compliance without test or certificate evidence as a compliance gap, not an approval.
- See Reference Images for visual artifacts and Build Guide for detailed assembly and bring-up steps.