Raspberry Pi 4/5 SBC
Rugged Survival Case Cyberdeck
概要
A cheap, rugged cyberdeck built inside an Amazon protective survival shockproof equipment case, featuring a 10-inch widescreen display and a full-size ergonomic split keyboard powered by a high-capacity USB-C rechargeable battery.
Perrie
システムアーキテクチャ
POWER
MCU
DISPLAY
RF
AUDIO
- POWER_MANAGEMENT → COMPUTE_MODULEPowerMain system power rail supplying the SBC
- POWER_MANAGEMENT → DISPLAY_SUBSYSTEMPowerDisplay power rail
- COMPUTE_MODULE → DISPLAY_SUBSYSTEMHDMIVideo output to portable monitor kit
- USER_INPUT → COMPUTE_MODULEUSBWired split mechanical keyboard connection over USB
- COMPUTE_MODULE → RF_CONNECTIVITYPCIeHigh-speed wireless interface for Wi-Fi and BT
- COMPUTE_MODULE → AUDIO_SUBSYSTEMI2SDigital audio stream output
- POWER_MANAGEMENT → COMPUTE_MODULEI2CBattery telemetry and fuel gauge monitoring
部品表（BOM）
| 型番 | タイプ | 部品 | メーカー | パッケージ | 数量 | データシート | 一致 |
|---|---|---|---|---|---|---|---|
| TPS62840DLCR | POWER | Texas Instruments BQ25896 + TPS62840 Manages USB-C PD charging for single-cell Li-Ion battery and provides clean 5V/3.3V system rails with telemetry via I2C | Texas Instruments | 8-VFDFN | 1 | 一致済み | |
検討された代替品3件を表示projects.detail.aiVerified | |||||||
| SC0490 | MCU | Raspberry Pi 4/5 SBC Main application processor running lightweight Linux, distraction-free writing environment (Obsidian/Vim), and media playback | Raspberry Pi | — | 1 | 保留中 | |
検討された代替品3件を表示projects.detail.aiVerified | |||||||
| RTD2556QR-VL-CG | DISPLAY | 10-inch Widescreen HDMI/USB-C Portable Monitor Kit Provides visual output for focus writing and media consumption inside the rugged enclosure | REALTEK | LQFP-156 | 1 | 一致済み | |
| RP2040 | MCU | Raspberry Pi RP2040 Coprocessor Scans mechanical split keyboard matrix and handles focus mode physical switch inputs | Raspberry Pi | QFN-56 | 1 | 一致済み | |
| AX210.NGWG | RF | Intel AX210NGW Wi-Fi 6 / Bluetooth 5.2 Module Provides standard wireless connectivity (Wi-Fi and Bluetooth) for remote access and syncing | Intel | - | 1 | 一致済み | |
検討された代替品1件を表示projects.detail.aiVerified | |||||||
| MAX98357AETE+ | AUDIO | I2S Audio DAC & Amplifier (MAX98357A) Drives internal speaker for media consumption and audio feedback | Analog Devices, Inc. | 16-WFQFN Exposed Pad | 1 | 一致済み | |
検討された代替品1件を表示projects.detail.aiVerified | |||||||
組み立てガイド
6-8 hoursAdvanced
1
Procurement & Preparation
- Gather all BOM components including the Amazon protective survival shockproof equipment case, TPS62840DLCR power management parts, Raspberry Pi 4/5 SBC, RTD2556QR-VL-CG display kit, RP2040 chip, AX210NGW module, and MAX98357A audio amplifier.
- Layout and drill the internal mounting plates of the protective equipment case for the 10-inch display, Raspberry Pi, split keyboard halves, and custom power management board.
- Prepare the custom PCB for the Texas Instruments BQ25896 and TPS62840 power rails, along with the RP2040 coprocessor breakout, using a stencil and solder paste.
2
Hardware Assembly & Wiring
- Mount the Raspberry Pi 4/5 SBC and the 10-inch widescreen monitor kit inside the case lid, routing the HDMI TMDS signals and DDC lines between them.
- Install the Intel AX210NGW Wi-Fi 6 / Bluetooth 5.2 module into the PCIe/M.2 slot on the compute module and route the external antenna leads through the case bulkhead.
- Wire the power management subsystem (BQ25896 + TPS62840) to deliver regulated 5V and 3.3V rails to the compute module, display, and I2C telemetry lines.
- Connect the split mechanical keyboard matrix to the RP2040 coprocessor, and link the coprocessor to the compute module via USB (D+, D-, VBUS, GND).
- Solder the MAX98357A I2S Audio DAC & Amplifier to the Raspberry Pi's I2S pins (BCLK, LRC, DIN, GND) and mount the internal speaker.
3
Firmware Setup
- Flash the lightweight Linux operating system image onto the bootable storage medium for the Raspberry Pi, pre-installing Vim, Obsidian, and audio drivers.
- Compile and flash custom QMK or KMK firmware onto the RP2040 coprocessor to scan the split keyboard matrix and map the focus mode physical switch inputs.
- Configure the Linux device tree overlays for the MAX98357A I2S audio DAC, the Intel AX210NGW wireless module, and I2C battery telemetry polling from the BQ25896.
4
Testing & Calibration
- Perform a complete power-on self-test (POST) while monitoring current draw and voltage levels across the TPS62840 5V and 3.3V rails using a digital multimeter.
- Test display output, resolution scaling, and backlight control on the 10-inch widescreen monitor via the HDMI connection.
- Verify split keyboard functionality, keypress registration, and proper toggling of the focus mode physical switch.
- Execute wireless connectivity tests for Wi-Fi 6 and Bluetooth 5.2, check audio playback through the MAX98357A amplifier and speaker, and verify USB-C PD charging telemetry.
ドキュメント
Rugged Survival Case Cyberdeck
A cheap, rugged cyberdeck built inside an Amazon protective survival shockproof equipment case, featuring a 10-inch widescreen display and a full-size ergonomic split keyboard powered by a high-capacity USB-C rechargeable battery.
Executive Summary
This reference design defines the system architecture, critical component candidates, risk register, and validation path for Rugged Cyberdeck. It is a system-level design deliverable; verify critical claims with manufacturer evidence and prototype testing before production release.
Design Overview
Requirements Coverage
| Requirement | Architecture coverage | Status |
|---|---|---|
| Focus writing environment | COMPUTE_MODULE, USER_INPUT, DISPLAY_SUBSYSTEM | Covered |
| Media consumption | COMPUTE_MODULE, DISPLAY_SUBSYSTEM, AUDIO_SUBSYSTEM | Covered |
| Standard Wi-Fi and Bluetooth connectivity | RF_CONNECTIVITY, COMPUTE_MODULE | Covered |
| Item | Details |
|---|---|
| Product Type | Rugged Cyberdeck |
| Key Functions | Focus writing environment, Media consumption, Standard Wi-Fi and Bluetooth connectivity |
| Power Source | Li-Ion Battery |
| Connectivity | WiFi, Bluetooth |
| Size | Amazon protective survival shockproof equipment case (approx. 10-inch widescreen display fit) |
| Environment | outdoor |
| Difficulty | Advanced |
| Est. Time | 6-8 hours |
System Architecture
Power Topology: USB-C PD input feeds BQ25896 charger/power-path controller, charging single-cell Li-Ion battery pack. TPS62840 step-down regulators convert VBAT to regulated 5V for SBC and display, and 3.3V for logic, keyboard coprocessor, and RF modules.
Module List
| Module ID | Type | Name | Function | Voltage |
|---|---|---|---|---|
| POWER_MANAGEMENT | POWER | Texas Instruments BQ25896 + TPS62840 | Manages USB-C PD charging for single-cell Li-Ion battery and provides clean 5V/3.3V system rails with telemetry via I2C | 5V |
| COMPUTE_MODULE | MCU | Raspberry Pi 4/5 SBC | Main application processor running lightweight Linux, distraction-free writing environment (Obsidian/Vim), and media playback | 5V |
| DISPLAY_SUBSYSTEM | DISPLAY | 10-inch Widescreen HDMI/USB-C Portable Monitor Kit | Provides visual output for focus writing and media consumption inside the rugged enclosure | 5V |
| USER_INPUT | MCU | Raspberry Pi RP2040 Coprocessor | Scans mechanical split keyboard matrix and handles focus mode physical switch inputs | 3.3V |
| RF_CONNECTIVITY | RF | Intel AX210NGW Wi-Fi 6 / Bluetooth 5.2 Module | Provides standard wireless connectivity (Wi-Fi and Bluetooth) for remote access and syncing | 3.3V |
| AUDIO_SUBSYSTEM | AUDIO | I2S Audio DAC & Amplifier (MAX98357A) | Drives internal speaker for media consumption and audio feedback | 3.3V |
Power Tree and Signal Interfaces
| From | To | Type | Interface / rail | Voltage |
|---|---|---|---|---|
| POWER_MANAGEMENT | COMPUTE_MODULE | power | Power | 5V |
| POWER_MANAGEMENT | DISPLAY_SUBSYSTEM | power | Power | 5V |
| COMPUTE_MODULE | DISPLAY_SUBSYSTEM | power | HDMI | - |
| USER_INPUT | COMPUTE_MODULE | power | USB | - |
| COMPUTE_MODULE | RF_CONNECTIVITY | power | PCIe | - |
| COMPUTE_MODULE | AUDIO_SUBSYSTEM | power | I2S | - |
| POWER_MANAGEMENT | COMPUTE_MODULE | power | I2C | 3.3V |
Design Schemes
Rugged SBC & Modular Cyberdeck Architecture ★
Utilizes a low-cost SBC (Raspberry Pi 4/5 or Rockchip alternative) running a lightweight writing environment, 10-inch widescreen HDMI display, integrated BQ25896 battery management, and RP2040-driven keyboard sub-system.
Trade-offs: Minimizes custom PCB design and software bring-up overhead at the expense of a slightly larger enclosure volume compared to a custom carrier board.
Key IC selection
Battery Charger and Power Path IC
- Need: Manage USB-C charging for single-cell Li-Ion battery while providing dynamic power path management and I2C telemetry.
- Class: Switch-mode I2C controlled Li-Ion charger IC
- Shortlist: Texas Instruments BQ25896, Analog Devices LTC4162
- Pick: Select based on input voltage range, maximum charging current capability, and I2C register compatibility with Linux power-supply drivers.
Main Application Processor
- Need: Execute lightweight Linux OS, host applications, and coordinate peripheral subsystems with low idle power.
- Class: Credit-card sized Single Board Computer / Compute Module
- Shortlist: Raspberry Pi 4 Model B, Raspberry Pi 5
- Pick: Select based on thermal profile inside rugged enclosure, available RAM options, and native PCIe/USB interface availability.
Wireless Network Interface Card
- Need: Provide robust Wi-Fi 6 and Bluetooth 5.2 connectivity in a compact M.2 or PCIe form factor.
- Class: M.2 2230 Wi-Fi 6 / Bluetooth module
- Shortlist: Intel AX210NGW, Qualcomm QCA6391
- Pick: Select based on robust Linux kernel mainline driver support and PCIe/USB interface availability on the host board.
Risk register
| ID | Area | Severity | Detail | Mitigation |
|---|---|---|---|---|
| r1 | thermal | high | The Raspberry Pi 4/5 combined with the Intel AX210 and internal display driver inside a sealed rugged enclosure will trap heat, leading to thermal throttling. | Design an internal thermal interface material (TIM) bridge utilizing the rugged metal chassis as a heatsink, and configure active or passive ducting. |
| r2 | emi | med | High-frequency switching regulators (TPS62840) and high-speed HDMI/USB traces running near the Intel AX210 Wi-Fi/BT module antennas may cause desense. | Ensure proper ground plane stitching, maintain physical separation between RF antennas and high-current power traces, and shield internal cabling. |
| r3 | power | high | Simultaneous heavy load from the Raspberry Pi, backlight of the 10-inch display, and Wi-Fi transmission can cause input voltage sag on the single-cell Li-Ion battery. | Select low-ESR battery protection ICs, ensure thick copper planes for 5V rails, and configure BQ25896 input current limit dynamically via I2C. |
Bring-up and Validation Plan
- Power-off inspection and rail resistance checks
- Current-limited first power-up; verify every rail before enabling loads
- Validate interfaces and timing one subsystem at a time
- Run thermal, fault-injection, EMC pre-scan, and endurance tests for the target environment
Key Components
5/6 modules matched to real parts. See the BOM tab for the full component table.
Texas Instruments BQ25896 + TPS62840 (TPS62840DLCR)
TPS62840DLCR is the exact active component matching the primary MPN TPS62840 from Texas Instruments.
Raspberry Pi 4/5 SBC (SC0490)
Rejected weak/wrong-class catalog hits; using web recommendation: SC0490
Raspberry Pi RP2040 Coprocessor (RP2040)
The candidate matches the primary MPN RP2040 and the preferred manufacturer Raspberry Pi.
Build Summary
- Difficulty: Advanced
- Estimated time: 6-8 hours
- Tools required: Soldering Iron, Hot Air Reflow Station, Digital Multimeter, Wire Strippers, Drill Press, Step Bit
See the Build tab for the full step-by-step assembly guide.
Evidence and Limitations
- Confirm part parameters, certifications, and compatibility against current manufacturer documents.
- Treat industry compliance without test or certificate evidence as a compliance gap, not an approval.
- See Reference Images for visual artifacts and Build Guide for detailed assembly and bring-up steps.
Generated by YuanQi AI Design System · Query: Cyberdeck built inside an Amazon protective survival shockproof equipment case (dimensions referenced from https://www.amazon.ca/Protective-Survival-Shockproof-Equipments-Dimensions/dp/B0DW2Q2584/147-3550499-6418368?psc=1). Include hardware architecture, component selection, and complete BOM documentation.