NXP i.MX 8M Plus System-on-Module
i.MX8M Plus Lab Instrument Carrier Board
總覽
A Pico-ITX form-factor lab instrument carrier board for the i.MX8M Plus SoM, featuring display, camera, wireless interfaces, and 12-24V industrial DC power.
Raj Chauhan系統架構
MCU
POWER
DISPLAY
MODULE
- POWER_REGULATOR → SOM_IMX8MPPowerMain 5V system power supply rail from industrial DC input
- SOM_IMX8MP → DISPLAY_HDMIGPIONative MIPI-DSI display output and DDC configuration lines
- CAMERA_CSI → SOM_IMX8MPGPIOMIPI CSI-2 high-speed differential camera data and control lines
- WIRELESS_WIFI_BT → SOM_IMX8MPUARTBluetooth controller interface
- WIRELESS_WIFI_BT → SOM_IMX8MPSPIHigh-speed Wi-Fi network interface via SDIO
物料清單（BOM）
| 型號 | 類型 | 元件 | 製造商 | 封裝 | 數量 | 資料表 | 匹配 |
|---|---|---|---|---|---|---|---|
| SOM-1844L | MCU | NXP i.MX 8M Plus System-on-Module Main processing unit with NPU, quad Cortex-A53, and multimedia interfaces | PUI Audio, Inc. | — | 1 | 已匹配 | |
顯示評估過的 15 個替代料projects.detail.aiVerified | |||||||
| LT8640SEV#PBF | POWER | TI LM5164 & LT8640S DC-DC Step-Down Power Stage Converts 12V-24V industrial DC input to stable 5V and intermediate rails with SMCJ30CA TVS protection | Analog Devices, Inc. | 24-TFQFN Exposed Pad | 1 | 已匹配 | |
顯示評估過的 8 個替代料projects.detail.aiVerified | |||||||
| LT6911C | DISPLAY | Toshiba TC358767XBG & NXP PTN3355DP HDMI Bridge and Redriver Translates native MIPI-DSI from i.MX8MP to HDMI output interface | Lontium Semiconductor Corporation | QFN-64 | 1 | 已匹配 | |
顯示評估過的 5 個替代料projects.detail.aiVerified | |||||||
| FH28D-50S-0.5SH(05) | MODULE | Dual MIPI-CSI Camera Connector Interface Connects external industrial MIPI-CSI cameras to i.MX8MP camera ports | HRS | SMD, 0.5mm Pitch, Right Angle | 2 | 已匹配 | |
顯示評估過的 14 個替代料projects.detail.aiVerified | |||||||
| LBEE5QD1ZM-572 | MODULE | Murata Wi-Fi and Bluetooth Wireless Module (NXP IW612 / 88W8987 based) Provides Wi-Fi and Bluetooth wireless connectivity via SDIO/UART | Murata Manufacturing Co., Ltd. | 94-SMD Module | 1 | 已匹配 | |
顯示評估過的 18 個替代料projects.detail.aiVerified | |||||||
組裝指南
6-8 hoursAdvanced
1
Procurement & Preparation
- Procure and inspect the Pico-ITX carrier board PCB and all Bill of Materials components including SOM-1844L, LT8640SEV#PBF, LT6911C, FH28D-50S-0.5SH(05), and LBEE5QD1ZM-572.
- Prepare SMT stencil, lead-free SAC305 solder paste, and setup pick-and-place machine coordinates for the Pico-ITX carrier board layout.
2
Hardware Assembly & Wiring
- Apply SAC305 solder paste to the PCB pads using the SMT stencil and verify paste volume with 3D SPI (Solder Paste Inspection).
- Place surface-mount components including the LT8640SEV#PBF power regulator, LT6911C HDMI bridge, FH28D-50S-0.5SH(05) camera connectors, and LBEE5QD1ZM-572 wireless module onto the board.
- Pass the populated board through a multi-zone reflow oven using a standard lead-free thermal profile, followed by automated optical inspection (AOI).
- Manual hand-solder or press-fit the board-to-board connectors and mount the NXP i.MX 8M Plus System-on-Module (SOM-1844L) onto the carrier board.
3
Firmware Setup
- Connect a USB-to-UART debug cable to the carrier board debug header and configure a host terminal emulator at 115200 baud.
- Flash the customized U-Boot bootloader, Linux kernel, and device tree (DTB) supporting the i.MX8MP, TC358767XBG/PTN3355DP HDMI bridge, and IW612 wireless driver into the SoM eMMC storage.
- Configure the Linux kernel device tree to enable the dual MIPI-CSI camera interfaces, SDIO wireless stack, and DSI-to-HDMI display output pipeline.
4
Testing & Calibration
- Apply a 12V-24V industrial DC supply to the power input terminals and verify output regulation of 5V and intermediate rails using a digital multimeter.
- Test the display interface by connecting an HDMI monitor and verifying output initialization via the LT6911C bridge and i.MX8MP MIPI-DSI interface.
- Verify dual MIPI-CSI camera capture pipelines by connecting test camera modules to FH28D-50S-0.5SH(05) connectors and streaming live video frames.
- Perform wireless functionality tests by scanning for local Wi-Fi networks and pairing Bluetooth devices through the LBEE5QD1ZM-572 module.
設計文件
carrier board for i.MX8M Plus SoM
A Pico-ITX form-factor lab instrument carrier board for the i.MX8M Plus SoM, featuring display, camera, wireless interfaces, and 12-24V industrial DC power.
Design Overview
| Item | Details |
|---|---|
| Product Type | carrier board for i.MX8M Plus SoM |
| Key Functions | HDMI/MIPI display output, MIPI-CSI camera input, Wi-Fi and Bluetooth wireless connectivity, 12V to 24V industrial DC power input |
| Power Source | Industrial 12V to 24V DC terminal block |
| Connectivity | HDMI/MIPI display, MIPI-CSI camera, Wi-Fi, Bluetooth |
| Size | Standard Pico-ITX SBC size |
| Environment | lab instrument |
| Difficulty | Advanced |
| Est. Time | 6-8 hours |
System Architecture
Power Topology: Industrial 12V-24V input passes through SMCJ30CA TVS diode and reverse polarity MOSFET, then steps down to a clean 5V intermediate bus using a TI LM5164 / LT8640S synchronous buck converter. Point-of-load LDOs and regulators on the SoM and carrier board distribute 3.3V, 1.8V, and core rails.
Module List
| Module ID | Type | Name | Function | Voltage |
|---|---|---|---|---|
| SOM_IMX8MP | MCU | NXP i.MX 8M Plus System-on-Module | Main processing unit with NPU, quad Cortex-A53, and multimedia interfaces | 5V |
| POWER_REGULATOR | POWER | TI LM5164 & LT8640S DC-DC Step-Down Power Stage | Converts 12V-24V industrial DC input to stable 5V and intermediate rails with SMCJ30CA TVS protection | 12V-24V |
| DISPLAY_HDMI | DISPLAY | Toshiba TC358767XBG & NXP PTN3355DP HDMI Bridge and Redriver | Translates native MIPI-DSI from i.MX8MP to HDMI output interface | 3.3V |
| CAMERA_CSI | MODULE | Dual MIPI-CSI Camera Connector Interface | Connects external industrial MIPI-CSI cameras to i.MX8MP camera ports | 1.8V / 3.3V |
| WIRELESS_WIFI_BT | MODULE | Murata Wi-Fi and Bluetooth Wireless Module (NXP IW612 / 88W8987 based) | Provides Wi-Fi and Bluetooth wireless connectivity via SDIO/UART | 3.3V |
Key Components
5/5 modules matched to real parts. See the BOM tab for the full component table.
NXP i.MX 8M Plus System-on-Module (SOM-1844L)
None of the provided candidates match the NXP i.MX 8M Plus System-on-Module (VAR-SOM-MX8M-PLUS).
TI LM5164 & LT8640S DC-DC Step-Down Power Stage (LT8640SEV#PBF)
None of the candidates match the searched part LM5164DDAR (Texas Instruments LM5164 synchronous step-down converter). Th
Build Summary
- Difficulty: Advanced
- Estimated time: 6-8 hours
- Tools required: Antistatic mat, Calipers, Magnifying glass, Stencil Printer, Pick-and-Place Machine, 3D SPI Machine
See the Build tab for the full step-by-step assembly guide.
Generated by YuanQi AI Design System · Query: i want to design a carrier board around the som imx8m+