Raspberry Pi 1 Model B+
Solar-Powered Rough Terrain Exploration Robot
總覽
A solar-powered autonomous exploration robot for rough terrain featuring distributed microcontrollers, RTK GPS navigation, and intermittent solar charging.
Thomas Feezel系統架構
POWER
MCU
MOTOR
SENSOR
RF
ACTUATOR
- POWER_MANAGEMENT_MODULE → COMPUTE_MODULE_RPI15VProvides regulated 5V power to Raspberry Pi 1
- POWER_MANAGEMENT_MODULE → MOTOR_CONTROL_SEEEDUINO5VProvides power to Seeeduino and motor drivers
- COMPUTE_MODULE_RPI1 → REAL_TIME_MODULE_PICO3.3VInter-processor command and telemetry link
- COMPUTE_MODULE_RPI1 → RTK_GPS_GPIO3.3VStreams NMEA and UBX positioning data to Raspberry Pi 1
- REAL_TIME_MODULE_PICO → SENSING_ADXL3453.3VReads real-time acceleration and vibration data
- COMPUTE_MODULE_RPI1 → WIRELESS_COMM_MODULE3.3VLong-range wireless remote monitoring and data transmission
- MOTOR_CONTROL_SEEEDUINO → DRIVE_SCAEMO5VPWM drive signals for Scaemo DC motors
- COMPUTE_MODULE_RPI1 → MOTOR_CONTROL_SEEEDUINO5VHigh-level motion commands from RPi1 to Seeeduino
- AUX_TELEMETRY_TRINKET → COMPUTE_MODULE_RPI13.3VAuxiliary telemetry reporting to companion computer
物料清單（BOM）
| 型號 | 類型 | 元件 | 製造商 | 封裝 | 數量 | 資料表 | 匹配 |
|---|---|---|---|---|---|---|---|
| CN3791 | POWER | Solar Panel with MPPT Charge Controller & USB Power Bank Provides buffered power storage under unstable outdoor sunlight and outputs 5V regulated system power. | CNC Tech | — | 1 | 已匹配 | |
| RASPBERRY PI 3 | MCU | Raspberry Pi 1 Model B+ Acts as the high-level companion computer for RTK GPS logging, data coordination, and remote monitoring interface. | Raspberry Pi | — | 1 | 已匹配 | |
| RP2040 | MCU | Raspberry Pi Pico (RP2040) Performs real-time sensor fusion and high-speed data acquisition from the IMU. | Raspberry Pi | QFN-56 | 1 | 已匹配 | |
| ATMEGA328P-ANR | MOTOR | Seeeduino (ATmega328P compatible) Drives the Scaemo STEM kit motors and manages low-level PWM actuator signals. | Microchip Technology / Atmel | TQFP-32 | 1 | 已匹配 | |
顯示評估過的 4 個替代料projects.detail.aiVerified | |||||||
| SAMD21E18A-MUT | MCU | Adafruit Trinket M0 (SAMD21) Monitors auxiliary system telemetry and acts as a peripheral diagnostic node. | MICROCHIP | QFN EP | 1 | 已匹配 | |
顯示評估過的 1 個替代料projects.detail.aiVerified | |||||||
| ADXL345BCCZ | SENSOR | ADXL345 3-Axis Accelerometer Detects robot tilt, rough terrain vibrations, and motion orientation. | Analog Devices, Inc. | 14-VFLGA | 1 | 已匹配 | |
顯示評估過的 1 個替代料projects.detail.aiVerified | |||||||
| ZED-F9P | SENSOR | u-blox ZED-F9P RTK GPS Module Delivers centimeter-level (2.0 cm target) long-range positioning data. | U-BLOX | — | 1 | 已匹配 | |
顯示評估過的 2 個替代料projects.detail.aiVerified | |||||||
| SX1262ZTR8 | RF | SX1262 LoRa Long-Range Telemetry Module Enables wireless remote monitoring and transmission of RTCM correction data. | Silicontra | — | 1 | 已匹配 | |
顯示評估過的 5 個替代料projects.detail.aiVerified | |||||||
| Scaemo STEM Kit DC Motors & Wheels Chassis | ACTUATOR | Scaemo STEM Kit DC Motors & Wheels Chassis Drives the custom 3D printed rover across rough outdoor terrain supporting 1.5kg payload. | — | — | 1 | 待定 | |
組裝指南
12-16 hoursAdvanced
1
Procurement & Preparation
- Procure all bill of materials components including CN3791 MPPT controller, Raspberry Pi 1 Model B+, Raspberry Pi Pico, Seeeduino, Adafruit Trinket M0, ADXL345, u-blox ZED-F9P, SX1262 LoRa module, and the Scaemo STEM Kit chassis.
- 3D print the custom rover chassis housing and mechanical mounting brackets designed to secure the distributed microcontrollers, solar panel, and sensor payloads.
- Prepare wiring harnesses, jumper wires, Dupont connectors, and heat shrink tubing for 5V power distribution and 3.3V logic level data buses.
2
Hardware Assembly & Wiring
- Mount the CN3791 solar panel power management module and USB power bank to the chassis and wire its 5V output to the Raspberry Pi 1 Model B+ (VBUS, GND) and Seeeduino (VCC, GND).
- Interconnect the companion computer and microcontrollers by wiring the Raspberry Pi 1 to the Raspberry Pi Pico (TX, RX, GND at 3.3V) and Seeeduino (TX, RX, GND at 5V).
- Install the u-blox ZED-F9P RTK GPS module and SX1262 LoRa telemetry module, connecting the ZED-F9P to the Raspberry Pi 1 GPIO (TX, RX, GND) and the SX1262 via SPI (MOSI, MISO, SCK, CS, GND).
- Mount the ADXL345 3-axis accelerometer to the Raspberry Pi Pico via I2C (SDA, SCL, VCC, GND) and wire the Adafruit Trinket M0 auxiliary telemetry node to the Raspberry Pi 1 (SDA, SCL, GND).
- Wire the Seeeduino motor control output channels to the Scaemo STEM Kit DC motors (PWM1, PWM2, GND) and assemble the chassis, wheels, and 1.5kg payload platform.
3
Firmware Setup
- Flash the Raspberry Pi 1 Model B+ OS and configure Python scripts for RTK GPS logging, data coordination, and remote monitoring web interface.
- Program the Raspberry Pi Pico (RP2040) with real-time sensor fusion firmware to acquire high-speed IMU data from the ADXL345 accelerometer.
- Upload firmware to the Seeeduino (ATmega328P) to parse incoming serial commands and generate precise PWM actuator signals for motor control.
- Program the Adafruit Trinket M0 (SAMD21) to monitor auxiliary system telemetry and report health diagnostics back to the main computer.
- Configure the SX1262 LoRa module firmware for long-range telemetry transmission and reception of RTCM correction data.
4
Testing & Calibration
- Perform bench power-up testing using a multimeter to verify 5V regulated output from the MPPT power bank and proper voltage distribution across all distributed microcontrollers.
- Calibrate the u-blox ZED-F9P RTK GPS module outdoors to achieve the target 2.0 cm centimeter-level positioning accuracy using base station RTCM corrections over LoRa.
- Validate ADXL345 accelerometer tilt detection and terrain vibration responses by tilting the rover across known pitch and roll angles.
- Execute end-to-end motor drive and autonomous navigation trials on rough outdoor terrain carrying a simulated 1.5kg payload.
- Verify intermittent solar charging performance by exposing the solar panel to sunlight and monitoring battery buffer recovery rates via the auxiliary telemetry node.
設計文件
Solar-Powered Rough Terrain Exploration Robot
A solar-powered autonomous exploration robot for rough terrain featuring distributed microcontrollers, RTK GPS navigation, and intermittent solar charging.
Executive Summary
This reference design defines the system architecture, critical component candidates, risk register, and validation path for Solar-Powered Exploration Robot. It is a system-level design deliverable; verify critical claims with manufacturer evidence and prototype testing before production release.
Design Overview
Requirements Coverage
| Requirement | Architecture coverage | Status |
|---|---|---|
| Rough terrain exploration | MOTOR_CONTROL_SEEEDUINO, DRIVE_SCAEMO, SENSING_ADXL345 | Covered |
| Autonomous data collection | Pending validation | Needs verification |
| Long-range RTK GPS positioning | Pending validation | Needs verification |
| Remote monitoring | Pending validation | Needs verification |
| Distributed multi-controller processing | Pending validation | Needs verification |
| Item | Details |
|---|---|
| Product Type | Solar-Powered Exploration Robot |
| Key Functions | Rough terrain exploration, Autonomous data collection, Long-range RTK GPS positioning, Remote monitoring, Distributed multi-controller processing |
| Power Source | Solar Panels with USB Power Bank |
| Connectivity | RTK GPS, Long-range Wireless |
| Size | Custom 3D printed chassis size determined by user |
| Environment | outdoor |
| Difficulty | Advanced |
| Est. Time | 12-16 hours |
System Architecture
Power Topology: Solar panels collect energy under direct sunlight, regulated via an MPPT charge controller into a USB Power Bank buffer. The power bank outputs 5V to distribute regulated power rails to the Raspberry Pi 1, Seeeduino motor controller, and onboard DC-DC step-down converters for 3.3V logic modules (RPi Pico, Trinket M0, RTK GPS, LoRa, and ADXL345).
Module List
| Module ID | Type | Name | Function | Voltage |
|---|---|---|---|---|
| POWER_MANAGEMENT_MODULE | POWER | Solar Panel with MPPT Charge Controller & USB Power Bank | Provides buffered power storage under unstable outdoor sunlight and outputs 5V regulated system power. | 5V |
| COMPUTE_MODULE_RPI1 | MCU | Raspberry Pi 1 Model B+ | Acts as the high-level companion computer for RTK GPS logging, data coordination, and remote monitoring interface. | 5V |
| REAL_TIME_MODULE_PICO | MCU | Raspberry Pi Pico (RP2040) | Performs real-time sensor fusion and high-speed data acquisition from the IMU. | 3.3V |
| MOTOR_CONTROL_SEEEDUINO | MOTOR | Seeeduino (ATmega328P compatible) | Drives the Scaemo STEM kit motors and manages low-level PWM actuator signals. | 5V |
| AUX_TELEMETRY_TRINKET | MCU | Adafruit Trinket M0 (SAMD21) | Monitors auxiliary system telemetry and acts as a peripheral diagnostic node. | 3.3V |
| SENSING_ADXL345 | SENSOR | ADXL345 3-Axis Accelerometer | Detects robot tilt, rough terrain vibrations, and motion orientation. | 3.3V |
| RTK_GPS_GPIO | SENSOR | u-blox ZED-F9P RTK GPS Module | Delivers centimeter-level (2.0 cm target) long-range positioning data. | 3.3V |
| WIRELESS_COMM_MODULE | RF | SX1262 LoRa Long-Range Telemetry Module | Enables wireless remote monitoring and transmission of RTCM correction data. | 3.3V |
| DRIVE_SCAEMO | ACTUATOR | Scaemo STEM Kit DC Motors & Wheels Chassis | Drives the custom 3D printed rover across rough outdoor terrain supporting 1.5kg payload. | 5V |
Power Tree and Signal Interfaces
| From | To | Type | Interface / rail | Voltage |
|---|---|---|---|---|
| POWER_MANAGEMENT_MODULE | COMPUTE_MODULE_RPI1 | power | 5V | 5V |
| POWER_MANAGEMENT_MODULE | MOTOR_CONTROL_SEEEDUINO | power | 5V | 5V |
| COMPUTE_MODULE_RPI1 | REAL_TIME_MODULE_PICO | power | 3.3V | 3.3V |
| COMPUTE_MODULE_RPI1 | RTK_GPS_GPIO | power | 3.3V | 3.3V |
| REAL_TIME_MODULE_PICO | SENSING_ADXL345 | power | 3.3V | 3.3V |
| COMPUTE_MODULE_RPI1 | WIRELESS_COMM_MODULE | power | 3.3V | 3.3V |
| MOTOR_CONTROL_SEEEDUINO | DRIVE_SCAEMO | power | 5V | 5V |
| COMPUTE_MODULE_RPI1 | MOTOR_CONTROL_SEEEDUINO | power | 5V | 5V |
| AUX_TELEMETRY_TRINKET | COMPUTE_MODULE_RPI1 | power | 3.3V | 3.3V |
Design Schemes
Distributed Heterogeneous Multi-Controller Solar Rover Architecture ★
Full integration of Raspberry Pi 1 for RTK logging, Raspberry Pi Pico for real-time sensor fusion, Seeeduino for motor control, and Trinket M0 for auxiliary telemetry.
Trade-offs: Maximizes hardware heterogeneity and project complexity using user-available boards, at the cost of increased inter-processor communication overhead.
Key IC selection
High-level companion computer
- Need: Run Linux OS, manage RTK data logging, coordinate USB/UART peripherals and remote interface.
- Class: Application Processor / Single Board Computer module
- Shortlist: Raspberry Pi Compute Module 4, NXP i.MX6ULL SODIMM module
- Pick: Select based on Linux support, available peripheral interfaces (UART/USB), and long-term industrial availability.
Real-time co-processor for IMU fusion
- Need: Execute deterministic low-latency sensor sampling from ADXL345 via I2C/SPI.
- Class: 32-bit Dual-Core ARM Cortex-M0+ Microcontroller
- Shortlist: Raspberry Pi RP2040, STMicroelectronics STM32F401
- Pick: Choose low-cost, high-availability MCU with flexible PIO peripherals for custom sensor interfacing.
Long-range RF telemetry transceiver
- Need: Provide robust sub-GHz wireless communication link for telemetry and RTCM corrections over rough terrain.
- Class: Sub-GHz LoRa Transceiver IC
- Shortlist: Semtech SX1262, Silicon Labs Si4463
- Pick: Select Semtech SX1262 for high link budget, low receive current, and native LoRa modulation standard.
Risk register
| ID | Area | Severity | Detail | Mitigation |
|---|---|---|---|---|
| r1 | power | high | Using an unbuffered USB Power Bank alongside a solar MPPT charger can cause brownouts during high motor-torque transients on the 5V rail. | Incorporate bulk electrolytic capacitance and a dedicated power path management IC (e.g., BQ25895) to isolate transient loads from compute rails. |
| r2 | thermal | med | Enclosure heating under direct outdoor solar radiation combined with linear or poorly optimized switching regulators can lead to thermal throttling. | Use high-efficiency synchronous buck converters for all voltage rails and provide thermal conduction paths to the 3D-printed chassis or external heatsink. |
| r3 | emi | high | Close physical proximity between the high-frequency DC motor PWM lines, the SX1262 LoRa antenna, and the ZED-F9P GPS antenna will cause RF desense and positioning degradation. | Apply strict PCB layout separation, use shielded twisted-pair cables for motors, place RF antennas away from motor drivers, and add common-mode chokes on power lines. |
Bring-up and Validation Plan
- Power-off inspection and rail resistance checks
- Current-limited first power-up; verify every rail before enabling loads
- Validate interfaces and timing one subsystem at a time
- Run thermal, fault-injection, EMC pre-scan, and endurance tests for the target environment
Key Components
8/9 modules matched to real parts. See the BOM tab for the full component table.
Solar Panel with MPPT Charge Controller & USB Power Bank (CN3791)
The candidate's MPN matches the primary MPN CN3791 and fits the required integrated circuit component class.
Raspberry Pi 1 Model B+ (RASPBERRY PI 3)
None of the candidates match the required primary MPN (Raspberry Pi 1 Model B+). Both candidates are for the Raspberry P
Raspberry Pi Pico (RP2040) (RP2040)
The candidate matches the primary MPN RP2040 and is manufactured by Raspberry Pi.
Adafruit Trinket M0 (SAMD21) (SAMD21E18A-MUT)
Candidate 1 (SAMD21J18A-AUT) shares the primary MPN SAMD21 base family, but Candidate 1 lacks the exact prefix match. Wa
Scaemo STEM Kit DC Motors & Wheels Chassis (Scaemo STEM Kit DC Motors & Wheels Chassis)
Web recommendation: Scaemo STEM Kit DC Motors & Wheels Chassis (not in ES)
Build Summary
- Difficulty: Advanced
- Estimated time: 12-16 hours
- Tools required: Soldering Iron, Multimeter, Wire Strippers, Crimping Tool, 3D Printer, Hex Wrenches
See the Build tab for the full step-by-step assembly guide.
Evidence and Limitations
- Confirm part parameters, certifications, and compatibility against current manufacturer documents.
- Treat industry compliance without test or certificate evidence as a compliance gap, not an approval.
- See Reference Images for visual artifacts and Build Guide for detailed assembly and bring-up steps.
Generated by YuanQi AI Design System · Query: Solar-powered robot using available components: Raspberry Pi 1, Raspberry Pi Pico, Arduino Trinket M0, Seeeduino, ADXL345 3-axis accelerometer, RTK GPIO board, breadboards, solar panels, wheels, and motors from a Scaemo STEM kit.