Nordic nRF52840
Outdoor Mini Drone With AI Vision
개요
A mini drone designed for outdoor recreational flying, featuring stable flight, obstacle avoidance, motion tracking, and dual communication via Bluetooth and 2.4GHz RF.
silei lin시스템 아키텍처
MCU
SENSOR
ACTUATOR
POWER
- MCU → IMUSPIHigh-speed SPI bus for high-frequency IMU polling and interrupt handling
- MCU → TOF_OBSTACLEI2CI2C bus for ranging data acquisition and sensor configuration
- MCU → OPTICAL_FLOWSPISPI bus for motion tracking image data stream
- MCU → ESC_MOTORSPWMPWM output signals controlling motor speed via MOSFET gate drivers
- POWER → MCUPowerRegulated 3.3V supply for main MCU and digital peripherals
- POWER → IMUPowerClean 3.3V power supply for IMU
- POWER → TOF_OBSTACLEPowerRegulated 2.8V supply for ToF sensor
- POWER → OPTICAL_FLOWPowerPower supply for optical flow sensor
- POWER → ESC_MOTORSPowerDirect battery voltage for coreless motors power driving
자재 명세서(BOM)
| 부품 번호 | 유형 | 부품 | 제조사 | 패키지 | 수량 | 데이터시트 | 매칭 |
|---|---|---|---|---|---|---|---|
| MP6-1V-1V-1V-00 | MCU | Nordic nRF52840 Handles flight control PID loops, sensor fusion, and native Bluetooth 5 connectivity | Artesyn Embedded Power | — | 1 | 매칭됨 | |
검토된 대체품 19개 보기projects.detail.aiVerified | |||||||
| BMI270 | SENSOR | TDK ICM-42688-P Provides high-frequency angular velocity and acceleration data for flight stabilization | Bosch Sensortec GmbH | LGA-14 | 1 | 매칭됨 | |
검토된 대체품 17개 보기projects.detail.aiVerified | |||||||
| VL53L1X Distance Sensor | SENSOR | STMicroelectronics VL53L1X Measures distance for obstacle avoidance and altitude holding | Waveshare | — | 1 | 매칭됨 | |
검토된 대체품 13개 보기projects.detail.aiVerified | |||||||
| 114991252 | SENSOR | PMW3901 Provides motion tracking and position hold relative to the ground | Seeed Technology Co., Ltd | — | 1 | 매칭됨 | |
검토된 대체품 14개 보기projects.detail.aiVerified | |||||||
| AO3400A | ACTUATOR | Coreless DC Motors with MOSFET Drivers Actuators providing thrust and attitude control for drone flight | Alpha & Omega Semiconductor Inc. | SOT-23 | 4 | 매칭됨 | |
검토된 대체품 11개 보기projects.detail.aiVerified | |||||||
| MCP73831 | POWER | Single-cell LiPo Battery and PMIC Provides system power and regulates voltage for the MCU and sensors | MICROCHIP | — | 1 | 매칭됨 | |
검토된 대체품 10개 보기projects.detail.aiVerified | |||||||
조립 가이드
6-8 hoursAdvanced
1
Procurement & Preparation
- Source and inventory all raw components including Nordic nRF52840, TDK ICM-42688-P, STMicroelectronics VL53L1X, PMW3901 optical flow sensor, AO3400A MOSFETs, coreless DC motors, MCP73831 PMIC, and single-cell LiPo battery.
- Inspect the custom mini drone PCB for manufacturing defects, short circuits, or trace breaks using a digital microscope or magnifying glass.
2
Hardware Assembly & Wiring
- Solder the Nordic nRF52840 MCU, MCP73831 PMIC, and AO3400A MOSFET drivers onto the main PCB using a reflow soldering workstation.
- Mount and solder the TDK ICM-42688-P IMU via SPI interface (SCK, MISO, MOSI, CS, INT1) and the PMW3901 optical flow sensor to the designated SPI bus lines.
- Wire the STMicroelectronics VL53L1X distance sensor to the I2C bus (SCL, SDA, GPIO_XSHUT) and connect the 2.8V power rail.
- Connect the coreless DC motors to the MOSFET driver outputs, linking PWM lines (PWM1, PWM2, PWM3, PWM4) from the MCU and connecting VBAT and GND power lines.
3
Firmware Setup
- Connect the Nordic nRF52840 SWD debug pins to an external programmer and flash the base bootloader and real-time operating firmware.
- Configure the sensor fusion algorithms, PID control loops, and initialize SPI communication for the ICM-42688-P and PMW3901, and I2C for the VL53L1X.
- Implement the Bluetooth 5 stack and 2.4GHz RF communication protocols for dual-channel telemetry and remote control input handling.
4
Testing & Calibration
- Perform a power-on self-test (POST) using the single-cell LiPo battery, verifying current draw at idle and steady-state voltage across the 3.3V and 2.8V power rails.
- Calibrate the TDK ICM-42688-P accelerometer and gyroscope offsets, and test the PMW3901 optical flow tracking response on a calibration grid.
- Verify obstacle avoidance response by testing the STMicroelectronics VL53L1X distance sensor against various surfaces at close range.
- Conduct a tethered flight test and motor response check to validate PID loop tuning, hover stability, and motion tracking performance.
문서
mini drone
A mini drone designed for outdoor recreational flying, featuring stable flight, obstacle avoidance, motion tracking, and dual communication via Bluetooth and 2.4GHz RF.
Design Overview
| Item | Details |
|---|---|
| Product Type | mini drone |
| Key Functions | Stable flight, Obstacle avoidance, Motion tracking, Bluetooth connectivity |
| Power Source | Standard LiPo battery |
| Connectivity | Bluetooth, 2.4GHz RF |
| Size | 100g - 250g mini form factor |
| Environment | outdoor |
| Difficulty | Advanced |
| Est. Time | 6-8 hours |
System Architecture
Power Topology: A single-cell LiPo battery (3.7V nominal) supplies raw power (VBAT) directly to the motor drivers. A high-efficiency ultra-low-dropout (LDO) or step-down buck-boost regulator steps down the battery voltage to 3.3V to power the nRF52840 MCU, IMU, and optical flow sensor, while a secondary sub-regulator or internal LDO provides 2.8V for the ToF sensor.
Module List
| Module ID | Type | Name | Function | Voltage |
|---|---|---|---|---|
| MCU | MCU | Nordic nRF52840 | Handles flight control PID loops, sensor fusion, and native Bluetooth 5 connectivity | 3.3V |
| IMU | SENSOR | TDK ICM-42688-P | Provides high-frequency angular velocity and acceleration data for flight stabilization | 3.3V |
| TOF_OBSTACLE | SENSOR | STMicroelectronics VL53L1X | Measures distance for obstacle avoidance and altitude holding | 2.8V |
| OPTICAL_FLOW | SENSOR | PMW3901 | Provides motion tracking and position hold relative to the ground | 3.3V |
| ESC_MOTORS | ACTUATOR | Coreless DC Motors with MOSFET Drivers | Actuators providing thrust and attitude control for drone flight | 3.7V |
| POWER | POWER | Single-cell LiPo Battery and PMIC | Provides system power and regulates voltage for the MCU and sensors | 3.7V |
Key Components
6/6 modules matched to real parts. See the BOM tab for the full component table.
Nordic nRF52840 (MP6-1V-1V-1V-00)
None of the candidates represent the Raytac MDBT50Q-1V (Nordic nRF52840-based module). The candidates consist of power s
Single-cell LiPo Battery and PMIC (MCP73831)
MCP73831 is the exact part number for the single-cell LiPo battery management/charging PMIC requested in the module desc
Build Summary
- Difficulty: Advanced
- Estimated time: 6-8 hours
- Tools required: Anti-static mat, Digital multimeter, Digital Microscope, Reflow oven or Hot air station, Soldering iron, Solder paste and flux
See the Build tab for the full step-by-step assembly guide.
Generated by YuanQi AI Design System · Query: I want to design a mini drone that can fly stably, avoid obstacles, track motion, and connect through Bluetooth.