Is there a pin-compatible replacement for 0201WMF8061TEE?

Several 0201 resistors have similar resistance, but none of the reviewed candidates meet the strict engineering rule for increased power handling. A pin-compatible part with a higher power rating would be required for a low-risk replacement.

What risks should I check before replacing 0201WMF8061TEE?

Key risks include resistance deviation, which can affect circuit accuracy, and insufficient power rating, which can lead to overheating and failure. Always verify the replacement's power, resistance, tolerance, and TCR in your specific application.

0201WMF8061TEE Alternatives, Datasheet & Cross Reference | UNI-ROYAL

0201WMF8061TEE is a general-purpose 0201 thick film chip resistor with 8.06kΩ resistance, ±1% tolerance, and a 0.05W power rating. Finding a direct substitute requires careful review of power rating and resistance.

AI replacement insight

Electrical riskhigh

Using a part with the same 0.05W rating carries risk if the application pushes the component to its limit.

Package risklow

Many 0201 package resistors are available, ensuring physical compatibility.

Sourcing riskmedium

Finding a part that meets all criteria, especially the higher power rating in a 0201 package, may be challenging.

Can it be replaced directly?

No, there are no direct replacements found that satisfy the engineering requirement for a 1.5x power rating safety factor.

Best replacement path

Search for an 8.06kΩ or 8.2kΩ, 1% tolerance, 0201 package resistor with a power rating of at least 0.075W (e.g., 1/10W or 0.1W).

Main risk

The primary risk is selecting a replacement with an inadequate power rating, which could compromise reliability under load.

Recommended alternatives

A 0201 resistor with slightly higher resistance (8.2kΩ) and same power rating; requires engineering review for power budget.

View details

Alternative comparison matrix

Feature / factor	0201WMF8061TEE	FRC0201F8201TS	RC-01W8201FT	Compatibility / risk
Package	0201	0201	0201	0201 — Form-factor compatible.; RC-01W8201FT: Form-factor compatible.
Resistance	8.06kΩ	8.2kΩ	8.2kΩ	8.2kΩ — 1.7% higher; likely acceptable for most applications.; RC-01W8201FT: 1.7% higher; likely acceptable for most applications.
Power	0.05W	0.05W	0.05W	0.05W — Matches target, but fails conservative 1.5x power rule (req. ≥0.075W).; RC-01W8201FT: Matches target, but fails conservative 1.5x power rule (req. ≥0.075W).
Tolerance	±1%	±1%	±1%	±1% — Identical precision.; RC-01W8201FT: Identical precision.
Tcr	±200 ppm/°C	±200 ppm/°C	±200ppm/℃	±200 ppm/°C / ±200ppm/℃ — Identical temperature coefficient.; RC-01W8201FT: Identical temperature coefficient.

Application & sourcing insights

Questions & answers

No direct drop-in alternatives were found that meet the conservative 1.5x power rating safety margin. The best path is to find a part with a higher power rating (≥0.075W) and verify its suitability.