
UNI-ROYAL
UNI-ROYAL 0402WGF1401TCE is a 0402 resistor from the same series with a slightly higher resistance of 1.4kΩ.
Finding a substitute for the UNI-ROYAL 0402WGF1331TCE 1.33kΩ resistor involves evaluating several pin-compatible 0402 options. While no exact match is available, alternatives with slightly different resistance values and potentially upgraded power ratings exist.
Resistance deviation is under 10% for top candidates. Power ratings are matched or better.
All viable candidates are in the same 0402 package.
Some candidates have unknown lifecycle status, posing a risk for long-term production.
No exact direct replacement was found. Several parametric alternatives exist with slight resistance differences that require engineering review.
Evaluate candidates like ERJ2RKF1201X (for higher power) or 0402WGF1401TCE (for similar specs) based on your circuit's tolerance to resistance changes.
The primary risk is the deviation in resistance value, which could affect circuit performance in sensitive applications like voltage dividers or filter networks.

UNI-ROYAL
UNI-ROYAL 0402WGF1401TCE is a 0402 resistor from the same series with a slightly higher resistance of 1.4kΩ.
| Feature / factor | 0402WGF1331TCE | 0402WGF1401TCE | ERJ2RKF1201X | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 1.33kΩ | 1.4kΩ | 1.2kΩ | 1.4kΩ / 1.2kΩ — +5.3% deviation from target.; ERJ2RKF1201X: -9.8% deviation from target. | |
| Power | 0.0625W | 0.0625W | 0.1W | 0.0625W / 0.1W — matched; ERJ2RKF1201X: Candidate has higher power rating. | |
| Tolerance | ±1% | ±1% | ±1% | ±1% — matched; ERJ2RKF1201X: matched | |
| Package | 0402 | 0402 | 0402 | 0402 — matched; ERJ2RKF1201X: matched | |
| Manufacturer | UNI-ROYAL | UNI-ROYAL | - | UNI-ROYAL — Same manufacturer and series. | |
| Lifecycle | Active | - | Active | Active — matched |
The best alternative depends on your priority. For a higher power rating, consider Panasonic's ERJ2RKF1201X (1.2kΩ). For a closer match from the same manufacturer, UNI-ROYAL's 0402WGF1401TCE (1.4kΩ) is a good option. Both require verifying the resistance change is acceptable.