Is there a pin-compatible replacement for 0402WGF3483TCE?

Yes, many 0402 chip resistors are pin-compatible. However, finding an exact 348kΩ, 1% match is key. Parametric alternatives like FRC0402F3403TS (340kΩ) fit the board but have different electrical values.

What risks should I check before replacing 0402WGF3483TCE?

The main risk is the change in resistance. A deviation from 348kΩ can affect circuit timing, gain, or sensor accuracy. Always verify the new resistance value is acceptable for your design.

0402WGF3483TCE Alternatives, Datasheet & Cross Reference | UNI-ROYAL

Finding a replacement for the 0402WGF3483TCE, a 348kΩ 1% 0402 resistor, involves checking for parametric alternatives with similar power and tolerance. Alternatives may have slightly different resistance values requiring circuit analysis.

AI replacement insight

Electrical riskmedium

Resistance deviation requires engineering validation.

Package risklow

All suggested alternatives use the same 0402 package.

Can it be replaced directly?

No exact drop-in replacement was found in this review. The closest options are parametric alternatives with slightly different resistance values, like 340kΩ.

Best replacement path

Search for 0402, 1/16W, ±1% resistors and select the closest available E96 resistance value, such as 340kΩ or 357kΩ, then verify in-circuit.

Main risk

The primary risk is the resistance mismatch, which could alter the circuit's intended electrical behavior, such as gain, timing, or sensor feedback.

Recommended alternatives

Alternative from the same manufacturer and series with a slightly lower resistance value.

View details

Alternative comparison matrix

Feature / factor	0402WGF3483TCE	0402WGF3403TCE	FRC0402F3403TS	0402WGF3653TCE	Compatibility / risk
Resistance	348 kΩ	340 kΩ	340 kΩ	365 kΩ	340 kΩ / 365 kΩ — 2.3% lower. From same manufacturer as target.; FRC0402F3403TS: 2.3% lower than target. Requires circuit analysis.; 0402WGF3653TCE: 4.9% higher than target. Requires circuit analysis.
Package	0402	0402	0402	0402	0402 — matched; FRC0402F3403TS: Same 0402 package ensures form-fit compatibility.; 0402WGF3653TCE: matched
Power	1/16W	1/16W	1/16W	1/16W	1/16W — matched; FRC0402F3403TS: matched; 0402WGF3653TCE: matched
Tolerance	±1%	±1%	±1%	±1%	±1% — matched; FRC0402F3403TS: matched; 0402WGF3653TCE: matched
Tcr	±100 ppm/°C	-	±100 ppm/°C	-	±100 ppm/°C — TCR matches target's likely spec.

Application & sourcing insights

Questions & answers

The best alternative depends on your circuit's tolerance for resistance deviation. Parts like 0402WGF3403TCE (340kΩ) are very close, but any change from 348kΩ requires engineering review.