Is there a pin-compatible replacement for 0402WGF5233TCE?

No, there are no confirmed pin-to-pin replacements because the key electrical parameter, resistance, does not match exactly. However, several alternatives are form-fit compatible (same 0402 package) with a slightly different resistance value.

What risks should I check before replacing 0402WGF5233TCE?

The main risk is the change in resistance value. A deviation of 2-3% can affect the performance of sensitive analog circuits, filters, or voltage dividers. Always verify the impact of this change on your specific application's performance.

0402WGF5233TCE Alternatives, Datasheet & Cross Reference | UNI-ROYAL

Find and compare parametric alternatives for the UNI-ROYAL 0402WGF5233TCE, a 523kΩ 1% 0402 chip resistor. This guide highlights options with similar specs and analyzes the risks of substitution.

AI replacement insight

Electrical riskmedium

Resistance differs by 2-3%, which may be outside the acceptable range for precision circuits.

Package risklow

All suggested alternatives use the same 0402 package, ensuring physical compatibility.

Can it be replaced directly?

No, there is no direct drop-in replacement. The target's 523kΩ resistance is a specific E96 value, and alternatives have nearby standard values like 511kΩ, requiring circuit validation.

Best replacement path

Use an AEC-Q200 qualified 511kΩ resistor like AF0402FR-07511KL, but verify circuit tolerance for the -2.3% resistance shift.

Main risk

The primary risk is the resistance mismatch, which can alter the electrical behavior of the circuit (e.g., gain, timing, bias points).

Recommended alternatives

Parametric alternative with 511kΩ resistance and AEC-Q200 qualification in the same 0402 package.

View details

Alternative comparison matrix

Feature / factor	0402WGF5233TCE	AF0402FR-07511KL	FRC0402F5113TS	Compatibility / risk
Resistance	523 kΩ	511 kΩ	511 kΩ	511 kΩ — Candidate resistance is 2.3% lower. Verify circuit tolerance.; FRC0402F5113TS: Candidate resistance is 2.3% lower. Verify circuit tolerance.
Package	0402	0402	0402	0402 — Same 0402 package ensures form-fit compatibility.; FRC0402F5113TS: matched
Tolerance	±1%	±1%	±1%	±1% — matched; FRC0402F5113TS: matched
Power	1/16 W	1/16 W	1/16 W	1/16 W — matched; FRC0402F5113TS: matched
Application	Commercial	AEC-Q200	-	AEC-Q200 — Candidate is AEC-Q200 qualified, suitable for automotive use.

Application & sourcing insights

Questions & answers

The best alternative is likely AF0402FR-07511KL. It has a very close resistance of 511kΩ (-2.3% deviation), matches all other key specs, and is AEC-Q200 qualified, offering higher reliability.