
UNI-ROYAL
A parametric alternative in the same 0402 package but with a higher nominal resistance of 976kΩ.
Find and compare alternatives for the UNI-ROYAL 0402WGF9093TCE, a 909kΩ 1% 0402 thick film resistor. Key parameters for replacement include resistance value, tolerance, power rating, and package size.
Resistance value differs by 7-10%, requiring circuit analysis.
All suggested alternatives use the same 0402 package.
No direct drop-in replacement with the exact 909kΩ value was found. However, several parametric alternatives with nearby resistance values are available.
Select a candidate with the closest resistance that fits the application's tolerance, such as 0402WGF9763TCE (976kΩ) or RC0402FR-07820KL (820kΩ).
The primary risk is the shift in nominal resistance, which could affect circuit performance if the design is sensitive to this parameter.

UNI-ROYAL
A parametric alternative in the same 0402 package but with a higher nominal resistance of 976kΩ.
| Feature / factor | 0402WGF9093TCE | 0402WGF9763TCE | FRC0402F8253TS | RC0402FR-07820KL | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0402 | 0402 | 0402 | 0402 | 0402 — Same EIA package size.; FRC0402F8253TS: Same EIA package size.; RC0402FR-07820KL: Same EIA package size. |
| Resistance | 909 kΩ | 976 kΩ | 825 kΩ | 820 kΩ | 976 kΩ / 825 kΩ / 820 kΩ — Candidate resistance is ~7.4% higher.; FRC0402F8253TS: Candidate resistance is ~9.2% lower.; RC0402FR-07820KL: Candidate resistance is ~9.8% lower. |
| Tolerance | ±1% | ±1% | ±1% | ±1% | ±1% — Same precision.; FRC0402F8253TS: Same precision.; RC0402FR-07820KL: Same precision. |
| Power | 1/16 W | 1/16 W | 1/16 W | 1/16 W | 1/16 W — Same power rating.; FRC0402F8253TS: Same power rating.; RC0402FR-07820KL: Same power rating. |
| Tcr | ±100 ppm/°C (est.) | - | - | ±100 ppm/°C | ±100 ppm/°C — Similar temperature stability. |
The best alternative depends on your circuit's tolerance. Candidates like 0402WGF9763TCE (976kΩ) or RC0402FR-07820KL (820kΩ) are parametrically similar but have different nominal resistance values that must be verified for your application.