
FOJAN
A 15.8kΩ, 1%, 0.1W thick film resistor in a 0603 package from FOJAN, matching all key parameters.
Finding a substitute for the 0603WAF1582T5E, a 15.8kΩ 1% 0.1W 0603 resistor, involves matching key electrical parameters and package size. Several cross-vendor options are available.
Low for pin-to-pin matches; medium for parametric alternatives where resistance differs.
All candidates share the same 0603 package, minimizing layout changes.
This is a common resistor value available from multiple manufacturers.
Direct replacement for 0603WAF1582T5E should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Start with Datasheet verified or Strong match candidates for 0603WAF1582T5E, then review parametric alternatives for package and electrical fit.
The main risk is using a part with a different nominal resistance, which can alter circuit behavior.

FOJAN
A 15.8kΩ, 1%, 0.1W thick film resistor in a 0603 package from FOJAN, matching all key parameters.
| Feature / factor | 0603WAF1582T5E | FRC0603F1582TS | RC0603FR-0715K8L | FRH0603B1602TS | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 15.8 kΩ | 15.8 kΩ | 15.8 kΩ | 16 kΩ | 15.8 kΩ / 16 kΩ — Exact match; RC0603FR-0715K8L: Exact match; FRH0603B1602TS: 1.26% higher than target |
| Power | 0.1 W | 0.1 W | 0.1W (1.0W in source) | 0.1 W | 0.1 W / 0.1W (1.0W in source) — Exact match; RC0603FR-0715K8L: Source data shows 1.0W, but datasheet implies 0.1W. Review required.; FRH0603B1602TS: Exact match |
| Tolerance | ±1% | ±1% | ±1% | ±0.1% | ±1% / ±0.1% — Exact match; RC0603FR-0715K8L: Exact match; FRH0603B1602TS: Tighter tolerance is an upgrade |
| Package | 0603 | 0603 | 0603 | 0603 | 0603 — Form and fit match; RC0603FR-0715K8L: Form and fit match; FRH0603B1602TS: Form and fit match |
| Tcr | ±100 ppm/°C | ±100 ppm/°C | - | - | ±100 ppm/°C — Exact match |
Verified drop-in options for 0603WAF1582T5E are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.