
FOJAN
A 0603 resistor with same power and tolerance, but slightly lower resistance at 2.0MΩ.
Finding a replacement for the UNI-ROYAL 0603WAF2104T5E, a 2.1MΩ 1% 0.1W 0603 resistor, involves checking for similar resistance, tolerance, and power ratings. Several alternatives exist with minor parametric differences.
Resistance differs by ~5%, which is often acceptable but requires verification.
All viable candidates use the same 0603 package.
These are common resistor values from multiple manufacturers.
No exact direct replacement was found in this batch. The closest candidates have a slight resistance deviation from the target's 2.1MΩ.
Prioritize candidates with matching ±1% tolerance and 0.1W power in an 0603 package. The closest options have slightly different resistance values (2.0MΩ or 2.2MΩ) which should be validated.
The primary risk is the slight deviation in resistance value, which could affect circuit timing, biasing, or feedback loops.

FOJAN
A 0603 resistor with same power and tolerance, but slightly lower resistance at 2.0MΩ.
| Feature / factor | 0603WAF2104T5E | FRC0603F2004TS | FRC0603F2204TS | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0603 | 0603 | 0603 (1608 Metric) | 0603 / 0603 (1608 Metric) — Same package and pin count.; FRC0603F2204TS: Same package and pin count. | |
| Resistance | 2.1MΩ | 2.0MΩ | 2.2MΩ | 2.0MΩ / 2.2MΩ — Candidate resistance is 4.8% lower.; FRC0603F2204TS: Candidate resistance is 4.8% higher. | |
| Tolerance | ±1% | ±1% | ±1% | ±1% — Precision matches target.; FRC0603F2204TS: Precision matches target. | |
| Power | 0.1W | 0.1W | 0.1W | 0.1W — Power rating matches. Note: artifact data shows 1W, likely an error.; FRC0603F2204TS: Power rating matches. | |
| Tcr | ±100 ppm/°C | ±100 ppm/°C | ±100 ppm/°C | ±100 ppm/°C — Temperature coefficient matches.; FRC0603F2204TS: Temperature coefficient matches. |
Candidates like FOJAN's FRC0603F2204TS (2.2MΩ) or FRC0603F2004TS (2.0MΩ) are strong functional alternatives with the same package, power, and ±1% tolerance, but require verifying the resistance difference for your application.