
FOJAN
Matches resistance and package, but requires review of inconsistent power rating data and voltage margin.
Find and compare replacements for the UNI-ROYAL 0603WAF2801T5E, a 2.8kΩ 1% 0.1W 0603 thick film resistor. Review key parametric differences before selection.
Candidate power ratings are suspect and voltage margin is not met.
All candidates share the same 0603 package.
Direct replacement for 0603WAF2801T5E should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Start with Datasheet verified or Strong match candidates for 0603WAF2801T5E, then review parametric alternatives for package and electrical fit.
Data inconsistency in candidate power ratings and lack of voltage safety margin are the primary risks.

FOJAN
Matches resistance and package, but requires review of inconsistent power rating data and voltage margin.
| Feature / factor | 0603WAF2801T5E | FRC0603F2801TS | FRC0603F2741TS | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0603 | 0603 | 0603 | 0603 — Matches EIA 0603 package.; FRC0603F2741TS: Matches EIA 0603 package. | |
| Resistance | 2.8kΩ | 2.8kΩ | 2.74kΩ | 2.8kΩ / 2.74kΩ — Nominal resistance matches.; FRC0603F2741TS: Differs by -2.1%, which may be acceptable. | |
| Tolerance | ±1% | ±1% | - | ±1% — Tolerance matches. | |
| Power | 0.1W | 1.0W (suspect data) | 1.0W (suspect data) | 1.0W (suspect data) — Source data shows 1.0W, a significant upgrade, but ES data suggests 0.1W. Verification required.; FRC0603F2741TS: Source data shows 1.0W, but ES data suggests 0.1W. Verification required. | |
| Voltage | 75V | 75V | 75V | 75V — Matches target, but lacks recommended >10% safety margin.; FRC0603F2741TS: Matches target, but lacks recommended >10% safety margin. | |
| Tcr | ±100 ppm/°C | ±100 ppm/°C | - | ±100 ppm/°C — Temperature coefficient matches. |
Verified drop-in options for 0603WAF2801T5E are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.