
UNI-ROYAL
A 0603 resistor from the same series with lower resistance (3.9Ω).
Find and compare alternatives for the 0603WAF430KT5E, a 4.3Ω 1% 0.1W 0603 thick film resistor. This page provides analysis on parametric alternatives and potential risks.
All candidates have a resistance mismatch of ~9%.
All candidates match the 0603 package.
Many parametric alternatives are available.
No direct, drop-in replacement for 0603WAF430KT5E is confirmed. All candidates require review due to resistance value differences.
Use a parametric alternative from the same series, like 0603WAF390KT5E, and verify the impact of the 3.9Ω resistance.
The primary risk is the resistance deviation from the target's 4.3Ω, which could alter circuit behavior.

UNI-ROYAL
A 0603 resistor from the same series with lower resistance (3.9Ω).
| Feature / factor | 0603WAF430KT5E | 0603WAF390KT5E | FRC0603F4R70TS | ARG03BTC4R70 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0603 | 0603 | 0603 | 0603 | 0603 — Same package and pin count.; FRC0603F4R70TS: Same package and pin count.; ARG03BTC4R70: Same package and pin count. |
| Resistance | 4.3 Ω | 3.9 Ω | 4.7 Ω | 4.7 Ω | 3.9 Ω / 4.7 Ω — Candidate resistance is ~9.3% lower.; FRC0603F4R70TS: Candidate resistance is ~9.3% higher.; ARG03BTC4R70: Candidate resistance is ~9.3% higher. |
| Tolerance | ±1% | ±1% | ±1% | ±0.1% | ±1% / ±0.1% — matched; FRC0603F4R70TS: matched; ARG03BTC4R70: Tighter tolerance is an upgrade. |
| Power | 0.1 W | 0.1 W | 0.1 W | - | 0.1 W — Matched, but no safety margin.; FRC0603F4R70TS: Matched, but no safety margin. |
| Tcr | ±100 ppm/°C (est.) | ±100 ppm/°C | ±400 ppm/°C | ±25 ppm/°C | ±100 ppm/°C / ±400 ppm/°C / ±25 ppm/°C — From same series, likely match.; FRC0603F4R70TS: Significantly worse TCR.; ARG03BTC4R70: Tighter TCR is an upgrade. |
| Technology | Thick Film | - | - | Thin Film | Thin Film — Different technology may affect noise/pulse performance. |
No direct drop-in replacement was found. Alternatives like 0603WAF390KT5E from the same series offer similar performance but with a 3.9Ω resistance, requiring circuit validation.