Is there a pin-compatible replacement for 0603WAF820KT5E?

Yes, several 0603 package resistors are pin-compatible. However, you must verify electrical parameters like resistance and tolerance. For example, FRC0603J8R2 TS has the same resistance but a wider ±5% tolerance.

What risks should I check before replacing 0603WAF820KT5E?

Key risks include changes in resistance value, which can affect circuit timing or bias points, and wider tolerance (e.g., 5% vs 1%), which can impact precision. Also check the Temperature Coefficient of Resistance (TCR).

0603WAF820KT5E Alternatives, Datasheet & Cross Reference | UNI-ROYAL

Find and compare alternatives for the UNI-ROYAL 0603WAF820KT5E, an 8.2Ω, 1% tolerance, 0.1W thick film chip resistor in a 0603 package. Review key parametric differences before substitution.

AI replacement insight

Electrical riskmedium

Substitutes have different resistance or tolerance.

Package risklow

All viable candidates use the same 0603 package.

Sourcing risklow

0603 resistors are a common commodity component.

Can it be replaced directly?

No direct, 1-to-1 replacement has been identified. All candidates require a review of parametric trade-offs.

Best replacement path

Parametric alternatives with slightly different resistance or wider tolerance.

Main risk

Changes in resistance value or tolerance, impacting circuit performance.

Recommended alternatives

A 0603 8.2Ω 0.1W resistor with a wider tolerance (±5%) that may be suitable for non-precision applications.

View details

Alternative comparison matrix

Feature / factor	0603WAF820KT5E	FRC0603J8R2 TS	0603WAF750KT5E	Compatibility / risk
Package	0603 (1608 Metric)	0603	0603	0603 — Package size matches.; 0603WAF750KT5E: Package size matches.
Resistance	8.2 Ω	8.2 Ω	7.5 Ω	8.2 Ω / 7.5 Ω — Resistance value matches.; 0603WAF750KT5E: Resistance is 8.5% lower.
Power	0.1 W	0.1 W	0.1 W	0.1 W — Power rating matches.; 0603WAF750KT5E: Power rating matches.
Tolerance	±1%	±5%	±1%	±5% / ±1% — Candidate has wider tolerance.; 0603WAF750KT5E: Tolerance matches.
Tcr	Not specified	±400 ppm/°C	-	±400 ppm/°C — Candidate has a higher TCR, indicating less stability over temperature.

Application & sourcing insights

Questions & answers

There are no direct drop-in replacements found. Alternatives exist with different resistance values (e.g., 7.5Ω) or wider tolerance (e.g., ±5%), which require engineering review for your specific application.