Is there a pin-compatible replacement for 0805N562J500CT?

Yes, many 0805 capacitors are pin-compatible. However, for a true replacement, electrical parameters like capacitance (5.6nF), voltage (50V), and especially the stable NP0 dielectric must match. No exact pin-to-pin functional match was found in this review.

What risks should I check before replacing 0805N562J500CT?

Key risks are: 1) Dielectric Mismatch: Using X7R instead of NP0 causes instability. 2) Capacitance Mismatch: Using a different value can affect timing or filter characteristics. 3) Tolerance: A wider tolerance (e.g., ±10%) may not be suitable for precision circuits.

0805N562J500CT Alternatives, Datasheet & Cross Reference | Walsin Technology Corporation

Walsin's 0805N562J500CT is a 5.6nF, 50V, 0805 NP0 ceramic capacitor valued for its stability. Finding a replacement requires matching the NP0 dielectric, while alternatives with different capacitance values exist.

AI replacement insight

Electrical riskhigh

Substituting a non-NP0/C0G dielectric can cause functional failure due to temperature/voltage instability.

Package risklow

The 0805 package is standardized, making physical replacement straightforward.

Can it be replaced directly?

No exact direct replacement was found in this batch. Alternatives exist but differ in capacitance, requiring engineering review.

Best replacement path

Search for 0805 NP0/C0G capacitors with 5.6nF capacitance and a 50V or higher voltage rating.

Main risk

The primary risk is substituting with a different dielectric like X7R, which has poor stability and will likely cause circuit failure.

Recommended alternatives

A form-fit compatible capacitor with the same stable NP0 dielectric, but lower capacitance (4.7nF).

View details

Alternative comparison matrix

Feature / factor	0805N562J500CT	0805N472J500CT	C2012C0G1H103JT000N	Compatibility / risk
Package	0805 (2012 metric)	0805	0805 (2012 metric)	0805 / 0805 (2012 metric) — Form and fit are compatible.; C2012C0G1H103JT000N: Form and fit are compatible.
Dielectric	NP0	NP0	C0G	NP0 / C0G — Candidate has matching stable dielectric.; C2012C0G1H103JT000N: Candidate has equivalent stable dielectric.
Capacitance	5.6nF	4.7nF	10nF	4.7nF / 10nF — Capacitance is ~16% lower.; C2012C0G1H103JT000N: Capacitance is ~78% higher.
Voltage	50V	50V	50V	50V — Voltage rating matches.; C2012C0G1H103JT000N: Voltage rating matches.
Tolerance	±5%	±5%	±5%	±5% — Tolerance matches.; C2012C0G1H103JT000N: Tolerance matches.

Application & sourcing insights

Questions & answers

The best alternatives are other 0805 NP0/C0G capacitors with a 50V rating. Candidates like Walsin's 0805N472J500CT (4.7nF) are form-fit compatible but require verifying if the different capacitance is acceptable for your circuit.