FRC0805F1301TS
FOJAN
Needs validationlow risk
Close alternative with matching package, power, and tolerance, but slightly lower resistance.
Best Alternatives to 0805W8F1331T5E
Find and compare replacements for the UNI-ROYAL 0805W8F1331T5E, a 1.33kΩ 1% 0.125W 0805 thick film resistor. This guide provides verified alternatives and analyzes key parametric differences.
AI replacement insight
Electrical risklow
Resistance values are close, but require verification for precision circuits.
Package risklow
All suggested alternatives use the same 0805 package.
Can it be replaced directly?
Direct replacement for 0805W8F1331T5E should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Best replacement path
FRC0805F1301TS is the closest match, with a minor -2.25% resistance difference. For higher precision, consider RT0805BRD071K3L, but note the change to Thin Film technology.
Main risk
The primary risk is resistance deviation. Alternatives range from -2.25% to +5.26%, which may affect circuit performance in sensitive applications like voltage dividers or filters.
Recommended alternatives
2Alternative comparison matrix
| Feature / factor | 0805W8F1331T5E | FRC0805F1301TS | RT0805BRD071K3L | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 1.33kΩ | 1.3kΩ | 1.3kΩ | 1.3kΩ — -2.25% deviation, within E96 step; RT0805BRD071K3L: -2.25% deviation | |
| Tolerance | ±1% | ±1% | ±0.1% | ±1% / ±0.1% — matched; RT0805BRD071K3L: Higher precision | |
| Power | 0.125W | 0.125W | - | 0.125W — matched | |
| Package | 0805 | 0805 | - | 0805 — matched | |
| Technology | Thick Film | Thick Film | Thin Film | Thick Film / Thin Film — matched; RT0805BRD071K3L: Verify pulse handling/noise specs | |
| Tcr | ±100 ppm/°C (est.) | - | ±25 ppm/°C | ±25 ppm/°C — Better stability |
Application & sourcing insights
Questions & answers
Verified drop-in options for 0805W8F1331T5E are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.