Best Alternatives to 0805W8F2052T5E

Package: 0805UNI-ROYALChip Resistor - Surface MountResistance: 20.5 kΩTolerance: ±1%Power Rating: 0.125 W (1/8 W)Package / Case: 0805 (2012 Metric)Technology: Thick Film

Find and compare alternatives for the UNI ROYAL 0805W8F2052T5E, a 20.5kΩ 1% 0.125W 0805 chip resistor. Review key parametric differences before selection.

AI replacement insight

Electrical riskmedium

Resistance value differs, requiring circuit analysis.

Package risklow

Candidates share the same 0805 package.

Can it be replaced directly?

No direct drop-in replacement with the exact 20.5kΩ resistance was found. Alternatives require verifying the impact of a slight resistance change.

Best replacement path

The closest alternatives are standard E96 resistor values like 21.0kΩ or 19.6kΩ in the same 0805 package.

Main risk

The primary risk is the change in resistance, which can affect circuit timing, gain, or biasing. This must be evaluated in the application.

Recommended alternatives

3
FRC0805F1962TS package
Needs validationmedium risk

A parametric alternative in the same 0805 package with a 19.6kΩ resistance. Requires engineering review.

View details

Alternative comparison matrix

Feature / factor0805W8F2052T5EFRC0805F1962TSFRC0805F2102TSFRC0805F2152TSCompatibility / risk
Resistance20.5kΩ19.6kΩ21.0kΩ21.5kΩ19.6kΩ / 21.0kΩ / 21.5kΩ — -4.39% deviation.; FRC0805F2102TS: +2.44% deviation. Best available match.; FRC0805F2152TS: +4.88% deviation.
Package08050805080508050805 — matched; FRC0805F2102TS: Same EIA package size.; FRC0805F2152TS: matched
Power0.125W0.125W0.125W0.125W0.125W — matched; FRC0805F2102TS: matched; FRC0805F2152TS: matched
Tolerance±1%±1%±1%±1%±1% — matched; FRC0805F2102TS: matched; FRC0805F2152TS: matched
TcrNot specified-±100 ppm/°C-±100 ppm/°C — Target TCR not specified, assumed similar.

Application & sourcing insights

Questions & answers

The FRC0805F2102TS from FOJAN is a strong candidate, offering the same package, power, and tolerance with a resistance of 21.0kΩ, a +2.44% deviation. Suitability depends on your circuit's tolerance to this change.