
FOJAN
A close parametric match in an 0805 package, but lacks power and voltage derating margin.
Finding a substitute for the 0805W8F2372T5E, a 23.7kΩ 1% 0.125W 0805 resistor, requires checking key parameters. Alternatives exist but may require careful review of power and voltage margins.
Candidates lack power and voltage derating margins.
All candidates share the same 0805 package.
No direct drop-in replacement has been identified. All reviewed candidates have the same power and voltage ratings as the target, lacking standard engineering safety margins.
Consider FRC0805F2322TS for its very close resistance value, but verify power dissipation in your application as it offers no margin.
The main risk is electrical overstress, as potential substitutes do not offer higher power or voltage ratings than the original part.

FOJAN
A close parametric match in an 0805 package, but lacks power and voltage derating margin.
| Feature / factor | 0805W8F2372T5E | FRC0805F2322TS | FRC0805F2262TS | RC0805FR-0724K9L | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0805 | 0805 | 0805 | 0805 | 0805 — Package size matches.; FRC0805F2262TS: Package size matches.; RC0805FR-0724K9L: Package size matches. |
| Resistance | 23.7kΩ | 23.2kΩ | 22.6kΩ | 24.9kΩ | 23.2kΩ / 22.6kΩ / 24.9kΩ — Very close resistance match (-2.1% deviation).; FRC0805F2262TS: Resistance differs by -4.6%.; RC0805FR-0724K9L: Resistance differs by +5.1%. |
| Power | 0.125W | 0.125W | 0.125W | 0.125W | 0.125W — No power rating margin. Requires design review.; FRC0805F2262TS: No power rating margin. Requires design review.; RC0805FR-0724K9L: No power rating margin. Requires design review. |
| Voltage | 150V | 150V | 150V | 150V | 150V — No working voltage margin.; FRC0805F2262TS: No working voltage margin.; RC0805FR-0724K9L: No working voltage margin. |
| Tolerance | ±1% | ±1% | - | - | ±1% — Tolerance matches. |
FRC0805F2322TS from FOJAN is a strong candidate due to its nearly identical resistance (23.2kΩ vs 23.7kΩ). However, its power and voltage ratings are the same, so you must verify it meets your circuit's derating requirements.