
UNI-ROYAL
1206W4F8202T5E is an 82 kΩ higher-power option if the PCB can accept 1206.
0805W8F8202T5E is an 0805 82 kΩ ±1% thick film resistor. No verified drop-in substitute is shown; candidates need value or footprint review.
75 kΩ changes the design value.
1206 and 0402 do not fit 0805 pads.
Passive resistor; no firmware interface.
Kept candidates are catalog matched and active.
No verified pin-compatible 82 kΩ 0805 replacement was found.
Use 1206W4F8202T5E only with footprint review, or 0805W8F7502T5E only if 75 kΩ is acceptable.
Resistance or package changes can alter circuit behavior or assembly fit.

UNI-ROYAL
1206W4F8202T5E is an 82 kΩ higher-power option if the PCB can accept 1206.
| Feature / factor | 0805W8F8202T5E | 1206W4F8202T5E | 0805W8F7502T5E | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0805 | 1206 | - | 0805 — same case | |
| Pinout | 2 pads | 2 pads | - | 2 pads — generic chip resistor | |
| Resistance | 82 kΩ | 82 kΩ | - | 75 kΩ — -8.5% nominal | |
| Tolerance | ±1% | ±1% | - | ±1% — same tolerance | |
| Power | 0.125 W | 0.25 W | - | 0.125 W — same rating |
1206W4F8202T5E keeps 82 kΩ and raises power, but it needs a 1206 footprint review.