
FOJAN
FOJAN offers this pin-compatible 1kΩ, 1%, 0.25W thick film resistor in a 1206 package. A direct cross-vendor alternative.
The UNI-ROYAL 1206W4F1001T5E is a standard 1kΩ, 1%, 0.25W thick film chip resistor in a 1206 package. Numerous pin-compatible alternatives, upgrades, and cost-effective options with relaxed parameters are available from various manufacturers.
For pin-compatible parts, electrical risk is minimal. For others, tolerance or technology differences must be reviewed.
Most alternatives are in the same 1206 package, but always verify land patterns. Avoid parts in different packages like 1210.
This is a very common resistor value and package, with a deep supply chain across multiple vendors.
Direct replacement for 1206W4F1001T5E should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Use a direct cross-reference like Yageo's RC1206FR-071KL, which matches all key specifications.
The primary risk is using a part with a wider tolerance (e.g., 5% instead of 1%), which could impact circuit performance if not accounted for in the design.

FOJAN
FOJAN offers this pin-compatible 1kΩ, 1%, 0.25W thick film resistor in a 1206 package. A direct cross-vendor alternative.
| Feature / factor | 1206W4F1001T5E | FRC1206F1001TS | RC1206FR-071KL | RT1206BRD071KL | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 1 kΩ | 1 kΩ | - | - | 1 kΩ — Exact match. |
| Tolerance | ±1% | ±1% | - | - | ±0.1% — Tighter tolerance. |
| Power | 0.25 W | 0.25 W | - | - | 0.25 W — Exact match. |
| Package | 1206 | 1206 | - | - | 1206 — Exact match. |
| Technology | Thick Film | - | Thick Film | - | Thin Film — Upgrade to more stable technology. |
| Tcr | Not specified (likely >100) | - | - | 25 ppm/°C | 25 ppm/°C — Improved temperature stability. |
| Manufacturer | UNI-ROYAL | - | - | - | — |
Verified drop-in options for 1206W4F1001T5E are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.