
FOJAN
Matches package, resistance, and power, but has a potentially weaker Temperature Coefficient of Resistance (TCR).
Find substitutes for the UNI-ROYAL 1206W4F820LT5E, a 0.82Ω 1% 0.25W 1206 thick film resistor. Alternatives may vary in resistance, tolerance, or TCR, requiring careful engineering review.
Most candidates have different resistance or TCR.
All candidates share the same 1206 package.
No direct, fully-equivalent replacement has been identified. All candidates have at least one differing key parameter.
The best path is to use FRL1206FR820TS, but you must verify if its TCR of ≤±200ppm/°C is acceptable compared to the target's ±100ppm/°C.
The main risk is parametric deviation, primarily in resistance value and Temperature Coefficient of Resistance (TCR).

FOJAN
Matches package, resistance, and power, but has a potentially weaker Temperature Coefficient of Resistance (TCR).
| Feature / factor | 1206W4F820LT5E | FRL1206FR820TS | 1206W4F800LT5E | FRL1206FR750TS | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 1206 | 1206 | 1206 | 1206 | 1206 — Form factor matches.; 1206W4F800LT5E: Form factor matches.; FRL1206FR750TS: Form factor matches.; FRL1206FR800TS: Form factor matches. |
| Resistance | 0.82 Ω | 0.82 Ω | 0.80 Ω | 0.75 Ω | 0.82 Ω / 0.80 Ω / 0.75 Ω — Resistance value matches.; 1206W4F800LT5E: Resistance differs by -2.4%.; FRL1206FR750TS: Resistance differs by -8.5%.; FRL1206FR800TS: Resistance differs by -2.4%. |
| Tolerance | ±1% | ±1% | ±1% | ±1% | ±1% — Tolerance matches.; 1206W4F800LT5E: Tolerance matches.; FRL1206FR750TS: Tolerance matches.; FRL1206FR800TS: Tolerance matches. |
| Power | 0.25W | 0.25W | - | - | 0.25W — Power rating matches. |
| Tcr | ±100 ppm/°C | ≤±200 ppm/°C | ±100 ppm/°C | - | ≤±200 ppm/°C / ±100 ppm/°C — Candidate TCR is potentially worse.; 1206W4F800LT5E: TCR matches.; FRL1206FR800TS: Candidate TCR is potentially worse. |
No direct drop-in replacement was found. FRL1206FR820TS is a close parametric match, but has a potentially wider TCR. Other candidates have different resistance values and require circuit validation.