Is there a pin-compatible replacement for 181207F1001T4E?

Yes, but with caveats. Parts like FRC1812J102 TS are pin-compatible in an 1812 package but have a wider tolerance of ±5% compared to the original's ±1%. A full datasheet review is required.

What risks should I check before replacing 181207F1001T4E?

First, verify if your circuit can perform correctly with a ±5% tolerance resistor. If not, you may need to use an alternative with a different package, which requires PCB layout changes. Always check the full datasheet for all parameters.

181207F1001T4E Alternatives, Datasheet & Cross Reference | UNI-ROYAL

Reviewing alternatives for the UNI-ROYAL 181207F1001T4E, a 1kΩ ±1% 0.75W 1812 chip resistor. Key considerations for replacement are resistance tolerance and package compatibility.

AI replacement insight

Electrical riskmedium

Wider tolerance (±5%) on some candidates requires circuit validation.

Package riskhigh

Some alternatives are not in a 1812 package and require PCB redesign.

Can it be replaced directly?

No direct pin-to-pin replacement with identical key parameters was found. Alternatives exist with relaxed tolerance (±5%) or different packages, requiring engineering review.

Best replacement path

For applications tolerant of ±5% resistance, FRC1812J102 TS offers the same package and power. If ±1% is required, a board layout change to accommodate a different package may be needed.

Main risk

The primary risk is accepting a wider resistance tolerance (±5% vs ±1%), which could affect circuit performance in sensitive applications.

Recommended alternatives

Form-fit compatible with same power rating, but has a wider resistance tolerance of ±5%.

View details

Alternative comparison matrix

Feature / factor	181207F1001T4E	181207J0102T4E	FRC1812J102 TS	FRC2010F1001TS	Compatibility / risk
Package	1812	1812	1812 (4532 Metric)	2010 (5025 metric)	1812 / 1812 (4532 Metric) / 2010 (5025 metric) — Candidate package matches target.; FRC1812J102 TS: Candidate package matches target.; FRC2010F1001TS: Larger package, not a drop-in replacement.
Resistance	1000.0 ohm	1000.0 ohm	1000.0 ohm	1000.0 ohm	1000.0 ohm — Resistance matches.; FRC1812J102 TS: Resistance matches.; FRC2010F1001TS: Resistance matches.
Tolerance	1.0%	5.0%	5.0%	1.0%	5.0% / 1.0% — Tolerance is weaker, requires circuit validation.; FRC1812J102 TS: Tolerance is weaker, requires circuit validation.; FRC2010F1001TS: Tolerance matches.
Power	0.75 W	0.75 W	0.75 W	0.75 W	0.75 W — Power rating matches target.; FRC1812J102 TS: Power rating matches target.; FRC2010F1001TS: Power rating matches.

Application & sourcing insights

Questions & answers

If your design can accept ±5% tolerance, FRC1812J102 TS is a strong candidate in the same 1812 package. For designs requiring ±1% tolerance, FRC2010F1001TS is electrically similar but requires a larger 2010 footprint.