
FOJAN
A cross-vendor alternative from FOJAN with matching resistance, power, tolerance, and package.
Find pin-compatible and functional alternatives for the UNI-ROYAL 25121WF1200T4E, a 120Ω 1W 1% 2512 thick film resistor. Review key parametric differences before selection.
2512 is a standard package with many compatible options.
Risk is low for 1% matches, but medium if a 5% tolerance part is used.
Direct replacement for 25121WF1200T4E should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Start with Datasheet verified or Strong match candidates for 25121WF1200T4E, then review parametric alternatives for package and electrical fit.
Using a substitute with a wider resistance tolerance (e.g., 5% instead of 1%) in a precision-sensitive circuit.

FOJAN
A cross-vendor alternative from FOJAN with matching resistance, power, tolerance, and package.
| Feature / factor | 25121WF1200T4E | FRC2512F1200TS | RC2512FK-07120RL | RC2512JK-7W120RL | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 2512 | 2512 | 2512 | 2512 | 2512 — Same EIA package size.; RC2512FK-07120RL: Same EIA package size.; RC2512JK-7W120RL: matched; 25121WJ0121T4E: matched |
| Resistance | 120 Ω | 120 Ω | 120 Ω | 120 Ω | 120 Ω — matched; RC2512FK-07120RL: matched; RC2512JK-7W120RL: matched; 25121WJ0121T4E: matched |
| Power | 1 W | 1 W | 1 W | 2 W | 1 W / 2 W — matched; RC2512FK-07120RL: matched; RC2512JK-7W120RL: Higher power rating provides more design margin.; 25121WJ0121T4E: matched |
| Tolerance | ±1% | ±1% | ±1% | ±5% | ±1% / ±5% — matched; RC2512FK-07120RL: matched; RC2512JK-7W120RL: Wider tolerance may not be suitable for precision circuits.; 25121WJ0121T4E: Wider tolerance may not be suitable for precision circuits. |
| Tcr | Not specified | - | ±100 ppm/°C | - | ±100 ppm/°C — Standard TCR for this type. |
Verified drop-in options for 25121WF1200T4E are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.