Is there a pin-compatible replacement for 25SVPF100M?

The Panasonic 35SVPK82M uses the same E7 package and is likely pin-compatible. However, it is not a direct functional equivalent due to a much lower ripple current rating (960mA vs 3200mA) and must be validated by an engineer.

What risks should I check before replacing 25SVPF100M?

When replacing 25SVPF100M, the main risks are package mismatch, higher ESR causing inefficiency, and lower ripple current rating leading to overheating and premature failure. Always verify the candidate's datasheet against your application's requirements.

25SVPF100M Alternatives, Datasheet & Cross Reference | PANASONIC

The Panasonic 25SVPF100M is a 100µF 25V aluminum polymer capacitor in an E7 surface-mount package, valued for its low ESR and high ripple current. Finding a direct replacement requires careful matching of these electrical parameters and package size.

AI replacement insight

Electrical riskhigh

Most candidates have much lower ripple current ratings and higher ESR.

Package riskmedium

Some candidates have different footprints, requiring PCB layout changes.

Can it be replaced directly?

No direct, drop-in replacement has been identified. All candidates present significant parametric downgrades or package differences that require engineering validation.

Best replacement path

Review Panasonic's 35SVPK82M for applications not sensitive to ripple current, or source a new part matching 100µF, 25V, ~24mΩ ESR, and ~3200mA ripple in an 8mm SMD package.

Main risk

The primary risk is component failure due to candidates having significantly lower ripple current ratings than the target's 3200mA.

Recommended alternatives

A functional alternative with higher voltage, but different package, higher ESR, and significantly lower ripple current.

View details

Alternative comparison matrix

Feature / factor	25SVPF100M	PM101M035E077PTR	35SVPK82M	Compatibility / risk
Voltage	25V	35V	35V	35V — Higher voltage is acceptable.; 35SVPK82M: Higher voltage is acceptable.
Package	E7 (8.0mm x 6.9mm)	6.3mm x 7.7mm	E7	6.3mm x 7.7mm / E7 — Different diameter and height. Requires layout check.; 35SVPK82M: Same package code, likely pin compatible.
Esr	24 mΩ	50 mΩ	25 mΩ	50 mΩ / 25 mΩ — ESR is more than double the target.; 35SVPK82M: Very close to target.
Current	3200 mA	2000 mA	960 mA	2000 mA / 960 mA — Significantly lower ripple current handling.; 35SVPK82M: Extremely low ripple current handling.
Capacitance	100 µF	100 µF	82 µF	100 µF / 82 µF — matched; 35SVPK82M: 18% lower, may be acceptable.

Application & sourcing insights

Questions & answers

Currently, no candidate offers a direct, drop-in replacement. The Panasonic 35SVPK82M shares the same package but has significantly lower ripple current handling, requiring engineering review.