What risks should I check before replacing 292304-1?

Before replacing 292304-1, the main risk to check is the mechanical footprint. Verify the locations and sizes of all signal pins and, most importantly, the mounting tabs or posts. A mismatch will prevent the new part from fitting on your existing PCB.

292304-1 Alternatives, Datasheet & Cross Reference | TE Connectivity

Explore substitutes for the TE Connectivity 292304-1, a right-angle USB Type-B connector. This guide analyzes potential pin-compatible options and functional alternatives, highlighting the critical need to verify PCB footprints.

AI replacement insight

Package riskhigh

Connector footprints vary significantly, even for the same type. A mismatch requires a PCB redesign.

Electrical risklow

Most USB-B connectors share standard electrical characteristics suitable for USB 2.0 speeds.

Can it be replaced directly?

Direct replacement for 292304-1 should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

Start with Datasheet verified or Strong match candidates for 292304-1, then review parametric alternatives for package and electrical fit.

Main risk

The primary risk in replacing the 292304-1 is mechanical incompatibility. Most alternatives have different PCB footprints for their mounting tabs, which would require a board redesign.

Recommended alternatives

A potential pin-compatible USB Type-B right-angle connector; verify PCB footprint dimensions.

View details

Alternative comparison matrix

Feature / factor	292304-1	921-112A1010D10200	670688000	USB-U270-BWS	Compatibility / risk
Package	USB Type-B	USB Type-B	Different footprint	Different footprint	USB Type-B / Different footprint — Connector type and mounting style match.; 670688000: Mounting tabs (board locks) are different, requires PCB redesign.; USB-U270-BWS: Mounting posts are in different locations, requires PCB redesign.
Pinout	See datasheet	Visually compatible	-	-	Visually compatible — Datasheet drawings show a similar footprint, but dimensional verification is required.
Application	Through-Hole, Right Angle	Through Hole, Right Angle	Gold Flash	Through Hole, Right Angle	Through Hole, Right Angle / Gold Flash — Mounting type and orientation match.; 670688000: Contact plating is different but may be acceptable.; USB-U270-BWS: Mounting type and orientation match.
Resistance	Not specified	1000 MΩ MIN	-	30 mOhm	1000 MΩ MIN / 30 mOhm — Insulation resistance is comparable.; USB-U270-BWS: Contact resistance is comparable.

Application & sourcing insights

Questions & answers

Verified drop-in options for 292304-1 are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.