
KNSCHA
Strong functional alternative from the same manufacturer, but with a larger package diameter.
Find functional alternatives for the KNSCHA 87EC0492, a 33µF 400V radial capacitor. Key checks for any substitute include verifying the physical package dimensions, as most alternatives are larger, and confirming electrical ratings like ripple current and ESR.
All candidates have a 10mm diameter vs the target's 8mm, which may cause mechanical interference.
Several candidates match key electrical parameters like voltage, capacitance, and ESR.
No direct drop-in replacements were found. All suitable electrical alternatives, such as KNSCHA 87EC0493, have a larger package diameter that requires physical fit verification.
functional_alternate
Physical package mismatch; all viable electrical alternatives are larger.

KNSCHA
Strong functional alternative from the same manufacturer, but with a larger package diameter.
| Feature / factor | 87EC0492 | 87EC0493 | 87EC0179 | ERK2GM330G200T | Compatibility / risk |
|---|---|---|---|---|---|
| Package | Radial, 8mm x 20mm | Radial, 10mm x 15mm | Radial, 10mm x 18mm | Radial, 10mm x 20mm | Radial, 10mm x 15mm / Radial, 10mm x 18mm / Radial, 10mm x 20mm — Larger diameter and shorter length.; 87EC0179: Larger diameter and shorter length.; ERK2GM330G200T: Larger diameter may not fit. |
| Voltage | 400V | 400V | 400V | 400V | 400V — matched; 87EC0179: matched; ERK2GM330G200T: matched |
| Capacitance | 33µF | 33µF | 33µF | 33µF | 33µF — matched; 87EC0179: matched; ERK2GM330G200T: matched |
| Ripple Current | 370mA @ 100kHz | 370mA @ 100kHz | 440mA @ 120Hz | Unknown | 370mA @ 100kHz / 440mA @ 120Hz / Unknown — matched; 87EC0179: Higher rating, but at different frequency.; ERK2GM330G200T: Datasheet review required. |
| Esr | 500mΩ @ 100kHz | 500mΩ @ 100kHz | - | - | 500mΩ @ 100kHz — matched |
| Temperature | -25°C to +105°C | - | - | -40°C to +105°C | -40°C to +105°C — Wider operating range. |
The best alternatives are electrically similar parts like KNSCHA 87EC0493 or AISHI ERK2GM330G200T. However, all have a larger 10mm package diameter compared to the original's 8mm, so you must verify they will fit on your PCB.