Is there a pin-compatible replacement for A1002WR-S-6P?

No pin-to-pin compatible replacement has been verified. While candidates match key specs like pitch and pin count, their exact mechanical footprint must be compared against the A1002WR-S-6P datasheet to confirm pin compatibility.

What risks should I check before replacing A1002WR-S-6P?

The main risks are mechanical and thermal. First, verify the candidate's PCB footprint and height match your design. Second, check the operating temperature range, as many alternatives have a lower maximum temperature than the target's +105°C.

A1002WR-S-6P Alternatives, Datasheet & Cross Reference | CJT

A1002WR-S-6P is a 6-pin, 1.0mm pitch, right-angle SMT header from CJT. When searching for alternatives, it is critical to verify the mechanical footprint, orientation, and operating temperature range.

AI replacement insight

Package riskhigh

Footprint is not verified for any candidate and is a common point of failure for connectors.

Electrical riskmedium

Most candidates have weaker temperature ratings, which could impact reliability in some applications.

Can it be replaced directly?

No direct drop-in replacement for A1002WR-S-6P is confirmed. All candidates require engineering review of the footprint and temperature range.

Best replacement path

Review form_fit_function candidates like WF-1F100A6P or SM06B-SHLS-TF(LF)(SN), focusing on footprint verification via datasheet comparison.

Main risk

Mechanical incompatibility due to different PCB footprints and reduced thermal performance from a lower operating temperature range.

Recommended alternatives

JST alternative with matching specs, but likely weaker temperature range. Footprint verification is critical.

View details

Alternative comparison matrix

Feature / factor	A1002WR-S-6P	SM06B-SHLS-TF(LF)(SN)	WF-1F100A6P	WAFER-100W-6A	Compatibility / risk
Package	SMT, Right Angle	SMT, Right Angle	SMT, Right Angle	SMT, Right Angle	SMT, Right Angle — JST SHL series. Footprint requires verification.; WF-1F100A6P: High-level form matches, footprint requires verification.; WAFER-100W-6A: High-level form matches, footprint requires verification.
Pinout	6	6	6	-	6 — Pin count matches, footprint unverified.; WF-1F100A6P: Pin count matches, footprint unverified.
Current	1A	1A	1A	1A	1A — Current rating matches.; WF-1F100A6P: Current rating matches.; WAFER-100W-6A: Current rating matches.
Voltage	50V	50V	-	125V	50V / 125V — Voltage rating matches.; WAFER-100W-6A: Higher voltage rating is acceptable.
Temperature	-40°C to +105°C	-25°C to +85°C	-40°C to +85°C	-25°C to +70°C	-25°C to +85°C / -40°C to +85°C / -25°C to +70°C — Inferred from series datasheet; weaker than target.; WF-1F100A6P: Lower maximum operating temperature.; WAFER-100W-6A: Significantly narrower operating temperature range.

Application & sourcing insights

Questions & answers

Several functional alternatives exist, such as BXCONN's WF-1F100A6P or JST's SM06B-SHLS-TF(LF)(SN), but all require careful review. Key differences in operating temperature and the need to verify the SMT footprint mean no direct drop-in is confirmed.