What risks should I check before replacing A2006WR-2x4P?

Before replacing A2006WR-2x4P, you must check the mechanical compatibility. Verify the PCB footprint, pin length, and overall connector dimensions from the candidate's datasheet. Also, confirm the mating connector compatibility if it's part of a pair.

A2006WR-2x4P Alternatives, Datasheet & Cross Reference | CJT

Find potential replacements for the A2006WR-2x4P, an 8-pin, 2.0mm pitch right-angle header. This guide identifies strong candidates with matching electrical specs, but highlights the need for mechanical verification.

AI replacement insight

Package riskmedium

While pitch and pin count match, connector footprints can vary slightly between manufacturers. Verification is mandatory.

Electrical risklow

Top candidates match the 3A/250V rating, so electrical stress is not a primary concern.

Can it be replaced directly?

Direct replacement for A2006WR-2x4P should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

Verify the mechanical drawings of PHB2.0-02-8PWZ or S8B-PHDSS(LF)(SN) against your PCB layout.

Main risk

The primary risk is mechanical incompatibility, such as slight differences in footprint, pin length, or shroud dimensions, which can prevent proper PCB assembly.

Recommended alternatives

Strong candidate with matching key electrical and mechanical specs; requires datasheet verification for pinout.

View details

Alternative comparison matrix

Feature / factor	A2006WR-2x4P	PHB2.0-02-8PWZ	S8B-PHDSS(LF)(SN)	Compatibility / risk
Package	2x4 Pin Header	2x4 Pin Header	Through Hole	2x4 Pin Header / Through Hole — Package name matches.; S8B-PHDSS(LF)(SN): Generic package name, but part is from a known compatible series (JST PHD).
Mounting	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle — Mounting type and orientation match.; S8B-PHDSS(LF)(SN): Mounting type and orientation match.
Current	3A	3.0A	3A	3.0A / 3A — Current rating matches.; S8B-PHDSS(LF)(SN): Current rating matches.
Voltage	250V	250V	250V	250V — Voltage rating matches.; S8B-PHDSS(LF)(SN): Voltage rating matches.
Pinout	8 pos, 2.0mm pitch	8 pos, 2.0mm pitch	-	8 pos, 2.0mm pitch — Position count, rows, and pitch match. Footprint requires verification.
Manufacturer	CJT (Changjiang Connectors)	-	JST	JST — Major brand, target is likely a clone of this series.

Application & sourcing insights

Questions & answers

Verified drop-in options for A2006WR-2x4P are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.