Is there a pin-compatible replacement for A2008WV-8P?

A direct pin-to-pin replacement is not confirmed without comparing datasheets for mechanical dimensions. ZX-PHB2.0-2-4PLT is a likely form-fit-function match, but requires engineering review of the footprint.

What risks should I check before replacing A2008WV-8P?

The primary risks are mechanical and electrical. Ensure the substitute's PCB footprint, height, and shroud design match your board. Also, verify that the current and voltage ratings meet or exceed the original's 3A and 250V specifications.

A2008WV-8P Alternatives, Datasheet & Cross Reference | CJT

Finding a replacement for the A2008WV-8P, an 8-pin 2.0mm vertical header, requires matching the footprint, orientation, and electrical ratings. We've analyzed several alternatives to guide your selection.

AI replacement insight

Package riskmedium

Footprint and height differences are common in connectors and must be verified from datasheets.

Electrical risklow

Candidates with matching ratings are available, but downgrades must be avoided.

Sourcing risklow

Multiple manufacturers produce similar 2.0mm pitch headers, offering good availability.

Can it be replaced directly?

No direct drop-in replacement has been verified. ZX-PHB2.0-2-4PLT is a strong functional alternative that requires footprint verification.

Best replacement path

Evaluate ZX-PHB2.0-2-4PLT, which matches key electrical and mechanical parameters. A datasheet comparison of the mechanical drawings is the critical next step.

Main risk

The main risk is mechanical incompatibility. The substitute's footprint, including pin locations and plastic housing dimensions, may differ from the A2008WV-8P.

Recommended alternatives

A potential form, fit, and function substitute with identical pitch, pin count, and electrical ratings; requires mechanical verification.

View details

Alternative comparison matrix

Feature / factor	A2008WV-8P	ZX-PHB2.0-2-4PLT	ZX-HY2.0-8PLT	Compatibility / risk
Package	Through Hole Header	2.0mm Pitch Header	Through Hole	2.0mm Pitch Header / Through Hole — Both are vertical TH headers. Verify PCB footprint.; ZX-HY2.0-8PLT: Both are vertical TH headers. Verify footprint.
Rows	Not specified	2	-	2 — Candidate is 2x4. Target row count is unconfirmed.
Current	3 A	3.0A	2.0 A	3.0A / 2.0 A — matched; ZX-HY2.0-8PLT: Lower current rating requires circuit analysis.
Voltage	250 V	250V	250 V	250V / 250 V — matched; ZX-HY2.0-8PLT: matched

Application & sourcing insights

Questions & answers

ZX-PHB2.0-2-4PLT by Megastar is a strong candidate, offering the same 2.0mm pitch, 8-pin (2x4) configuration, and 3A/250V rating. However, you must verify the PCB layout for mechanical compatibility.