Is there a pin-compatible replacement for A2541HWV-7P?

No, a fully pin-compatible replacement was not found. While several alternatives have the same 7-pin, 2.54mm pitch layout, they all lack the shrouded 'box header' package of the A2541HWV-7P, making them mechanically different.

What risks should I check before replacing A2541HWV-7P?

Before replacing A2541HWV-7P, you must check three main risks: 1) Mechanical Fit: Ensure your design can use an unshrouded header. 2) Electrical Ratings: Verify the candidate's current and temperature ratings meet your needs. 3) Reliability: Check if a plating downgrade (e.g., from gold to tin) is acceptable.

A2541HWV-7P Alternatives, Datasheet & Cross Reference | CJT

Finding a substitute for the CJT A2541HWV-7P 7-pin box header requires careful review. While alternatives with the same 2.54mm pitch exist, the key challenge is the package difference, as most candidates are unshrouded headers.

AI replacement insight

Package riskhigh

Target is a shrouded box header; all candidates are unshrouded. This affects fit and mating.

Electrical riskmedium

Some candidates have weaker current, temperature, or plating specs that must be verified for the application.

Can it be replaced directly?

No, a direct, drop-in replacement for A2541HWV-7P was not identified. All candidates lack the shrouded 'box header' package, which is a critical mechanical feature.

Best replacement path

Use an unshrouded header like PZ254-1-07-Z-8.5 if the application's mechanical design can accommodate the missing shroud. No direct drop-in replacement was found.

Main risk

The primary risk is mechanical incompatibility due to the missing protective shroud on all candidates, which affects mating, keying, and pin protection.

Recommended alternatives

A functional alternative with matching pitch, pin count, and current, but lacks the target's protective shroud.

View details

Alternative comparison matrix

Feature / factor	A2541HWV-7P	PZ254-1-07-Z-8.5	HC-2510-7A	Compatibility / risk
Package	Box Header	Unshrouded Header	Unshrouded Header	Unshrouded Header — Target is a shrouded Box Header. Candidate lacks mechanical protection and keying.; HC-2510-7A: Target is a shrouded Box Header. Candidate lacks mechanical protection and keying.
Current	3 A	3.0 A	4 A	3.0 A / 4 A — Current rating matches the target.; HC-2510-7A: Higher current rating provides more margin.
Plating	Gold	Gold	Tin	Gold / Tin — Contact plating matches, ensuring similar contact resistance and reliability.; HC-2510-7A: Plating downgrade from Gold to Tin may impact long-term reliability and contact resistance.
Temperature	-40°C to +105°C	Not specified	-25°C to +85°C	Not specified / -25°C to +85°C — Operating temperature range is missing and must be verified from datasheet.; HC-2510-7A: Narrower operating temperature range.

Application & sourcing insights

Questions & answers

The best alternative found is HCTL's PZ254-1-07-Z-8.5, which matches the pitch, pin count, current, and plating. However, it is an unshrouded header and requires mechanical design verification as it lacks the target's protective shroud.