Is there a pin-compatible replacement for ACM7060-701-2PL-TL01?

Several candidates like CMF7060F-501-2P-T and ACM7060F-501T50 share the same 7060 package. While they are form-fit compatible, true pin-to-pin compatibility requires verifying the pinout from the datasheet and ensuring the different impedance is acceptable.

What risks should I check before replacing ACM7060-701-2PL-TL01?

Before replacing, check three main things: 1) Impedance: Ensure the alternative's impedance provides adequate noise suppression. 2) Rated Current: The replacement must handle at least 4A. 3) DC Resistance (DCR): A higher DCR will increase power loss and heat.

ACM7060-701-2PL-TL01 Alternatives, Datasheet & Cross Reference | TDK Electronics AG

Finding a substitute for the TDK ACM7060-701-2PL-TL01 involves balancing its 700Ω impedance with critical stress ratings. This guide identifies functional alternatives that meet or exceed current ratings while offering comparable form factors.

AI replacement insight

Electrical riskmedium

Impedance differences require re-evaluation of filtering performance.

Package risklow

All suggested alternatives use the same 7060 package, but pinout should be confirmed.

Can it be replaced directly?

No direct drop-in replacement was found. Several functional alternatives exist with similar packages but different impedance values that require engineering review.

Best replacement path

Select a candidate with a higher current rating, lower DCR, and the closest possible impedance. CMF7060F-501-2P-T is the strongest option but requires validation.

Main risk

The primary risk is impedance mismatch, which will alter the circuit's EMI filtering characteristics. Performance must be re-validated.

Recommended alternatives

Strong functional alternative with closely matched impedance and superior current and DCR ratings.

View details

Alternative comparison matrix

Feature / factor	ACM7060-701-2PL-TL01	CMF7060F-501-2P-T	ACM7060F-501T50	ACM7060-301-2PL-TL01	Compatibility / risk
Package	7060	7060	7060	7060	7060 — Package size matches.; ACM7060F-501T50: Package size matches.; ACM7060-301-2PL-TL01: Same package series from TDK.
Impedance	700 Ω	500 Ω	450 Ω	300 Ω	500 Ω / 450 Ω / 300 Ω — Lower impedance may alter filtering performance.; ACM7060F-501T50: Lower impedance will reduce filtering effectiveness.; ACM7060-301-2PL-TL01: Significantly lower impedance. Part is from the same TDK series.
Current	4 A	5 A	5.0 A	5 A	5 A / 5.0 A — Higher current rating provides more margin.; ACM7060F-501T50: Higher current rating.; ACM7060-301-2PL-TL01: Higher current rating.
Dcr	15 mΩ	10 mΩ	10 mΩ	10 mΩ	10 mΩ — Lower DCR reduces power loss.; ACM7060F-501T50: Lower DCR improves efficiency.; ACM7060-301-2PL-TL01: Lower DCR.
Voltage	80 V	125 V	125 V	80 V	125 V / 80 V — Higher voltage rating.; ACM7060F-501T50: Higher voltage rating.; ACM7060-301-2PL-TL01: Voltage rating matches.

Application & sourcing insights

Questions & answers

The best alternative found is CMF7060F-501-2P-T. It offers superior current (5A) and DCR (10mΩ) with a reasonably close impedance of 500Ω. However, you must verify its filtering performance in your application.