Is there a pin-compatible replacement for AHW3225F-100KTF?

No. All reviewed candidates have different package sizes (e.g., 0420, 0520) and are not pin-compatible with the target's 3225 (1210) footprint. A board layout change would be necessary.

What risks should I check before replacing AHW3225F-100KTF?

The main risk is physical incompatibility; all candidates require a new PCB layout. Also, check the weaker tolerance (±20% vs. ±10%) and potential EMI differences. The target's saturation current is unknown, which is a critical parameter to verify for your application.

AHW3225F-100KTF Alternatives, Datasheet & Cross Reference | APV Technology (Shenzhen) Co., Ltd

Finding a replacement for the AHW3225F-100KTF 10µH inductor requires careful attention to its 3225 (1210) package. While many parts offer similar electrical values, matching the physical footprint is the primary challenge.

AI replacement insight

Package riskhigh

All candidates have a different, larger package. Not a drop-in replacement.

Electrical riskmedium

Candidates have weaker tolerance (±20% vs ±10%). Target's saturation current is unknown, requiring application-level verification.

Can it be replaced directly?

No direct, pin-compatible replacement was identified among the candidates. All options require a PCB layout change.

Best replacement path

Search for a 10µH inductor in a 3225 (1210) package with ≥0.3A current, ≤1.0Ω DCR, and ±10% or better tolerance.

Main risk

The primary risk is the package mismatch. No candidate fits the target's 3225 (1210) footprint, mandating a board redesign.

Recommended alternatives

A shielded functional alternative with higher current, but in a larger package (0420) with wider tolerance.

View details

Alternative comparison matrix

Feature / factor	AHW3225F-100KTF	SMS0420-100MT	XR0520-100M	XRCD43-100M	Compatibility / risk
Package	3225 (1210)	0420 (~4.6x4.2mm)	0520 (~5.2x5.5mm)	SMD, 4.5mm x 4.0mm	0420 (~4.6x4.2mm) / 0520 (~5.2x5.5mm) / SMD, 4.5mm x 4.0mm — Requires board redesign.; XR0520-100M: Requires board redesign.; XRCD43-100M: Requires board redesign.
Current	0.3 A	1.6 A	2.5 A	1.15 A	1.6 A / 2.5 A / 1.15 A — Higher current rating.; XR0520-100M: Significantly higher current rating.; XRCD43-100M: Higher current rating is generally safe.
Dcr Ohm	1.0 Ω	0.22 Ω	0.175 Ω	0.182 Ω	0.22 Ω / 0.175 Ω / 0.182 Ω — Lower DCR improves efficiency.; XR0520-100M: Lower DCR improves efficiency.; XRCD43-100M: Lower DCR improves efficiency.
Tolerance	±10%	±20%	±20%	±20%	±20% — Wider tolerance may affect circuit precision.; XR0520-100M: Wider tolerance may affect circuit precision.; XRCD43-100M: Wider tolerance may affect circuit precision.
Shielding	Wire-wound Ferrite (Implied Shielding)	Shielded	-	Unshielded	Shielded / Unshielded — Similar shielding type is a good match.; XRCD43-100M: May increase EMI radiation/susceptibility.

Application & sourcing insights

Questions & answers

No direct drop-in replacement was found. The best functional alternative is SMS0420-100MT, offering higher current and similar shielding, but it requires a board redesign for its larger 0420 package.