Pricing

Best Alternatives to APH0630T4R7M

Package: SMD, 7.0mm x 6.6mmAPV Technology (Shenzhen) Co., LtdChokesInductance: 4.7 µHInductance Tolerance: ±20%Heat Rating Current (Irms): 5.15 ASaturation Current (Isat): 7.47 ADC Resistance (DCR): 33 mΩ

Find pin-compatible and functional alternatives for the APH0630T4R7M power inductor. This page provides verified substitutes, including upgrades with higher current ratings in the same package.

AI replacement insight

Electrical risklow

Candidates have matching or better electrical specs.

Package risklow

Top candidates share the same package dimensions. Always verify land pattern.

Can it be replaced directly?

Direct replacement for APH0630T4R7M should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

Use XR0630-4R7M or FXL0630-4R7-M for a drop-in upgrade with better current handling.

Main risk

The main risk is ensuring the PCB layout and land pattern are fully compatible, although datasheets indicate a match.

Recommended alternatives

2
FXL0630-4R7-M package
FXL0630-4R7-M

cjiang (Changjiang Microelectronics Tech)

Needs validationlow risk

A 4.7µH inductor with higher current ratings (6A Irms, 9A Isat) in a matching 7.0x6.6mm package.

View details

Alternative comparison matrix

Feature / factorAPH0630T4R7MFXL0630-4R7-MXR0630-4R7MAlt 3Compatibility / risk
Package7.0x6.6mm7.0x6.6x3.0mm-7.0x6.6x3.0mm — Datasheet confirms form-fit compatibility.
Inductance4.7µH4.7µH-4.7µH — matched
Current A5.15A6.0A-6.0A — Higher Irms provides more thermal margin.
Saturation Current A7.47A9.0A-9.0A — Higher Isat prevents saturation under load.
Dcr Ohm33mΩ33mΩ-33mΩ — matched
Temperature-40°C to +125°C-55°C to +125°C--55°C to +125°C — Wider operating range.

Application & sourcing insights

Questions & answers

Verified drop-in options for APH0630T4R7M are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.