Is there a pin-compatible replacement for ARG02BTC2493?

Yes, several 0402 package resistors are pin-compatible, including the Yageo RT series and others. However, pin compatibility does not guarantee electrical performance. You must verify that the substitute's resistance, tolerance, and TCR meet your circuit's requirements.

What risks should I check before replacing ARG02BTC2493?

The primary risk is the change in resistance, which can affect the accuracy of analog circuits. For lower-cost alternatives, check for wider tolerance (e.g., ±1% vs ±0.1%) and higher temperature coefficient (TCR), which reduce precision and stability.

ARG02BTC2493 Alternatives, Datasheet & Cross Reference | Viking Tech

Finding a substitute for the ARG02BTC2493, a 249kΩ 0.1% precision resistor, involves balancing resistance value with performance. While no exact match exists, several parametric alternatives are available that require careful review.

AI replacement insight

Electrical riskmedium

Resistance change requires validation. Downgrades to tolerance/TCR will reduce circuit precision.

Package risklow

All suggested alternatives share the same 0402 package, ensuring physical compatibility.

Can it be replaced directly?

No exact drop-in replacement was found. The closest options are parametric alternatives that require engineering review of the resistance change.

Best replacement path

Prioritize thin film 0402 resistors like the Yageo RT series with ±0.1% tolerance and ±25ppm/°C TCR, accepting a minor resistance deviation.

Main risk

Change in resistance value, which could alter circuit timing, gain, or bias points.

Recommended alternatives

Strongest alternative with matched precision specs but slightly lower resistance.

View details

Alternative comparison matrix

Feature / factor	ARG02BTC2493	RT0402BRD07240KL	RT0402BRE07232KL	FRC0402F2433TS	Compatibility / risk
Resistance	249kΩ	240kΩ	232kΩ	243kΩ	240kΩ / 232kΩ / 243kΩ — 3.6% lower than target. Requires circuit analysis.; RT0402BRE07232KL: 6.8% lower than target. Requires circuit analysis.; FRC0402F2433TS: 2.4% lower than target.
Tolerance	±0.1%	±0.1%	±0.1%	±1%	±0.1% / ±1% — matched; RT0402BRE07232KL: matched; FRC0402F2433TS: Wider tolerance than target's ±0.1%.
Tcr	±25ppm/°C	±25 ppm/°C	±25 ppm/°C	±100 ppm/°C	±25 ppm/°C / ±100 ppm/°C — matched; RT0402BRE07232KL: matched; FRC0402F2433TS: Higher TCR than target's ±25ppm/°C.
Technology	Thin Film	Thin Film	Thin Film	Thick Film	Thin Film / Thick Film — matched; RT0402BRE07232KL: matched; FRC0402F2433TS: Different technology, may affect noise/stability.
Package	0402	0402	0402	-	0402 — matched; RT0402BRE07232KL: matched

Application & sourcing insights

Questions & answers

The best alternative found is Yageo's RT0402BRD07240KL. It matches the target's 0402 package, ±0.1% tolerance, and ±25ppm/°C TCR, with a resistance of 240kΩ (3.6% lower than 249kΩ). This small difference should be verified for your application.