Is there a pin-compatible replacement for B2P-VH-BK(LF)(SN)?

Yes, several connectors share the same 2-pin, 3.96mm pitch, vertical through-hole footprint. However, none found have the same 10A current rating. All are rated for 7A, making them a downgrade that requires review.

What risks should I check before replacing B2P-VH-BK(LF)(SN)?

The main risk is the lower current rating. The JST original is rated for 10A, while common alternatives are rated for 7A. Using a lower-rated part can lead to overheating and failure if the circuit draws more than 7A.

B2P-VH-BK(LF)(SN) Alternatives, Datasheet & Cross Reference | JST

Finding a substitute for the JST B2P-VH-BK(LF)(SN) 2-pin 3.96mm header requires checking the current rating. While several alternatives match the vertical through-hole form factor, most have a lower 7A rating compared to the original's 10A.

AI replacement insight

Electrical riskmedium

All alternatives have a lower current rating (7A vs 10A).

Package risklow

Several alternatives match the vertical through-hole footprint.

Can it be replaced directly?

No direct drop-in replacement with a 10A rating was found. All form-factor compatible alternatives have a lower current rating of 7A, requiring engineering review.

Best replacement path

Use a form-factor compatible alternative like HCTL HC-VH-2ALT, but verify the application's current draw does not exceed 7A.

Main risk

The primary risk is electrical overstress, as all identified alternatives have a lower current rating (7A) than the original part (10A).

Recommended alternatives

A form-factor compatible header, but with a lower current rating that requires engineering review.

View details

Alternative comparison matrix

Feature / factor	B2P-VH-BK(LF)(SN)	HC-VH-2ALT	WAFER-VH3.96-2PZZ	ZX-VH3.96-2PLT	Compatibility / risk
Package	Through Hole, Top Entry	Through Hole, Vertical	Through Hole, Straight	Through Hole, Vertical	Through Hole, Vertical / Through Hole, Straight — Form factor matches target.; WAFER-VH3.96-2PZZ: Form factor matches target.; ZX-VH3.96-2PLT: Form factor matches target.
Current	10A	7A	7A	7A	7A — Significant downgrade from target.; WAFER-VH3.96-2PZZ: Significant downgrade from target.; ZX-VH3.96-2PLT: Significant downgrade from target.
Voltage	250V	250V	250V	250V	250V — Voltage rating matches.; WAFER-VH3.96-2PZZ: Voltage rating matches.; ZX-VH3.96-2PLT: Voltage rating matches.
Pitch	3.96mm	-	-	3.96mm	3.96mm — Pitch matches.

Application & sourcing insights

Questions & answers

Parts like HCTL HC-VH-2ALT or Megastar ZX-VH3.96-2PLT are good form-factor matches, but have a lower current rating of 7A versus the original's 10A. They should only be used after verifying the application's current needs.