Best Alternatives to B4B-XH-AM(LF)(SN)

Package: Through HoleJSTInterconnectsNumber of Positions: 4Pitch: 2.5 mmMounting Type: Through HoleCurrent Rating: 3 AVoltage Rating: 250 V

The JST B4B-XH-AM(LF)(SN) is a common 4-pin, 2.5mm pitch straight header. While many alternatives exist in the XH connector family, careful verification of mechanical dimensions, especially the mounting boss, is required for a reliable replacement.

AI replacement insight

Package riskmedium

Most alternatives lack the mounting boss of the original JST part.

Electrical risklow

Many alternatives match the 3A/250V rating, but verification is still needed.

Can it be replaced directly?

No direct drop-in replacement has been confirmed. Several functional alternatives exist, but all require mechanical verification of the mounting footprint.

Best replacement path

Source a cross-vendor XH-series 4-pin straight header and verify its mechanical drawing against the JST original, paying close attention to the mounting boss.

Main risk

Mechanical mismatch due to the absence of a mounting boss on most alternatives, potentially impacting PCB stability.

Recommended alternatives

2
XH-4PS package
XH-4PS

DEALON

Needs validationlow risk

This DEALON header is a functional alternative but lacks the mounting boss found on the JST part; check mechanical drawings.

View details

Alternative comparison matrix

Feature / factorB4B-XH-AM(LF)(SN)XH-4PSZX-XH2.54-4PZZ-YAlt 3Compatibility / risk
Pin Count4444 — Matched; ZX-XH2.54-4PZZ-Y: Matched
Pitch2.5mm2.5mm2.5mm2.5mm — Matched; ZX-XH2.54-4PZZ-Y: Matched
PackageStraight, Through Hole, with BossStraight, Through HoleStraight, Through HoleStraight, Through Hole — Candidate lacks mounting boss.; ZX-XH2.54-4PZZ-Y: Candidate lacks mounting boss.
Voltage250V250V250V250V — Matched; ZX-XH2.54-4PZZ-Y: Matched
Current3A3A3A3A — Matched; ZX-XH2.54-4PZZ-Y: Matched

Application & sourcing insights

Questions & answers

The best alternatives are other XH-series 4-pin straight headers like Megastar's ZX-XH2.54-4PZZ-Y or DEALON's XH-4PS, provided the absence of a mounting boss is acceptable for your PCB design.