
Same series from JST with identical footprint but shorter solder tails, requiring mechanical verification.
Find alternatives for the JST B4B-ZR-3.4(LF)(SN), a 4-pin, 1.5mm pitch through-hole header. While several functional matches exist, careful verification of mechanical dimensions, especially solder tail length, is required for a successful replacement.
Solder tail length difference between target (3.4mm) and alternatives requires careful PCB verification.
Key electrical parameters like pitch, voltage, and current are matched by several candidates.
Direct replacement for B4B-ZR-3.4(LF)(SN) should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
The closest alternative is B4B-ZR(LF)(SN) from the same JST ZH series, but it has a shorter 2.9mm solder tail. For a cross-vendor option, consider CJT's A1501WV-4P after verifying its mechanical dimensions.
The primary risk is mechanical incompatibility due to differences in solder tail length and connector shroud dimensions.

Same series from JST with identical footprint but shorter solder tails, requiring mechanical verification.
| Feature / factor | B4B-ZR-3.4(LF)(SN) | B4B-ZR(LF)(SN) | A1501WV-4P | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | Through Hole | Through Hole | Through Hole | Through Hole — Mounting type matches.; A1501WV-4P: Mounting type matches. | |
| Pitch | 1.5mm | 1.5mm | 1.5mm | 1.5mm — Pin pitch matches.; A1501WV-4P: Pin pitch matches. | |
| Positions | 4 | 4 | - | 4 — Number of positions matches. | |
| Pinout | 3.4mm | 2.9mm (standard) | Unknown | 2.9mm (standard) / Unknown — Different solder tail length. Requires PCB thickness verification.; A1501WV-4P: Solder tail length and shroud dimensions must be verified from datasheet. | |
| Voltage | 50V | 50V | 100V | 50V / 100V — Voltage rating matches.; A1501WV-4P: Higher voltage rating provides more margin. |
Verified drop-in options for B4B-ZR-3.4(LF)(SN) are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.