Is there a pin-compatible replacement for B6B-PH-K(LF)(SN)?

Several cross-vendor parts like the BXCONN WF-1A200A6P appear to be form-fit-function compatible, likely sharing the same pinout. Direct pin compatibility should be confirmed by comparing PCB layout dimensions from both datasheets.

What risks should I check before replacing B6B-PH-K(LF)(SN)?

Key risks include mechanical mismatches in shroud dimensions preventing proper mating, lower current ratings causing electrical stress, and differences in material plating affecting connection reliability. Always compare datasheets carefully.

B6B-PH-K(LF)(SN) Alternatives, Datasheet & Cross Reference | JST

The JST B6B-PH-K(LF)(SN) is a 6-pin, 2.0mm pitch through-hole header from the popular PH series. When seeking alternatives, focus on matching the 2.0mm pitch, single-row configuration, and critical shroud dimensions for mating compatibility.

AI replacement insight

Package riskmedium

Clones can have subtle dimensional or material differences. Always verify datasheet.

Electrical risklow

Most alternatives match or exceed voltage/current ratings, but downgrades exist and must be checked.

Sourcing risklow

The JST PH series is widely cloned, providing many sourcing options.

Can it be replaced directly?

No official drop-in replacement is listed, but several third-party connectors offer form-fit-function compatibility. The BXCONN WF-1A200A6P is a strong candidate requiring datasheet verification.

Best replacement path

Cross-vendor functional alternatives like the BXCONN WF-1A200A6P offer the most direct replacement path.

Main risk

The primary risk is mechanical incompatibility, specifically the connector shroud dimensions which dictate mating with the corresponding female housing.

Recommended alternatives

A form, fit, and functional alternative with matching key dimensions and electrical ratings.

View details

Alternative comparison matrix

Feature / factor	B6B-PH-K(LF)(SN)	WF-1A200A6P	PZ200V-11-06P	Compatibility / risk
Package	Through Hole	Through Hole	Through Hole	Through Hole — Mounting type matches.; PZ200V-11-06P: Mounting type matches.
Pitch	2.0mm	2.0mm	-	2.0mm — Pitch is identical.
Current	2.0A	2.0A	1.5A	2.0A / 1.5A — Current rating matches target's typical 2A rating.; PZ200V-11-06P: Current rating is lower than target's 2.0A.
Mechanical Dimensions	14.0mm	14.0mm	14.0mm	14.0mm — Key shroud width dimension matches target, indicating probable mating compatibility.; PZ200V-11-06P: Key shroud width dimension matches target.

Application & sourcing insights

Questions & answers

The BXCONN WF-1A200A6P is a strong candidate, matching key mechanical and electrical specifications. However, always verify the full datasheet for your specific application.