PH-6A
HR
Needs validationmedium risk
PH-6A is a possible 6-pin 2.0mm through-hole header alternative after footprint review.
Best Alternatives to B6B-PH-K-S(LF)(SN)
B6B-PH-K-S(LF)(SN) replacements should be screened as connector candidates, not assumed drop-in parts. Pitch, row count, entry direction, shroud, and mating housing are critical.
AI replacement insight
Electrical risklow
kept parts meet 2A and 100V where stated
Package riskmedium
footprint and entry direction need review
Firmware risklow
passive connector, no firmware
Sourcing riskmedium
cross-vendor fit not proven
Can it be replaced directly?
Direct replacement for B6B-PH-K-S(LF)(SN) should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Best replacement path
Check PH-6A or ZX-HY2.0-6PZZ only after footprint and mating-housing review; use S6B only if side-entry is acceptable.
Main risk
Mechanical footprint and mating geometry.
Recommended alternatives
3Alternative comparison matrix
| Feature / factor | B6B-PH-K-S(LF)(SN) | PH-6A | S6B-PH-K-S(LF)(SN) | ZX-HY2.0-6PZZ | Compatibility / risk |
|---|---|---|---|---|---|
| Package | Through Hole top-entry | Plugin/P=2mm | - | - | Through Hole — broad mount matches |
| Pinout | 1x6 PH header | 1x6, 2.0mm | - | - | 6 pos, rows missing — footprint not proven |
| Voltage | 100 V | 100 V | - | - | 100 V — same rating |
| Current | 2 A | 2 A | - | - | 2 A — same rating |
| Temperature | -25 to +85C | -25 to +85C | - | - | -25 to +85C — same range |
Application & sourcing insights
Questions & answers
Verified drop-in options for B6B-PH-K-S(LF)(SN) are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.