
Slkor(SLKORMICRO Elec.)
A form-fit alternate with higher power rating, but increased capacitance requires signal integrity review.
Finding a substitute for the BORN BESD0402G05V requires careful matching of its ultra-low capacitance (0.05pF). While form-fit alternatives exist, most have higher capacitance, posing a risk to signal integrity.
Capacitance mismatch is the main electrical risk, affecting signal integrity.
DFN1006 is a standard package with many form-fit options.
No direct drop-in replacement has been identified. All viable candidates have higher capacitance, which is a critical parameter for this part's intended high-speed applications.
Use a parametric search for TVS diodes in a DFN1006 package with VRWM of 5V and capacitance under 0.1pF.
The primary risk is increased junction capacitance, which can degrade high-speed signal integrity (e.g., USB 3.0, Ethernet).

Slkor(SLKORMICRO Elec.)
A form-fit alternate with higher power rating, but increased capacitance requires signal integrity review.
| Feature / factor | BESD0402G05V | BV-FA05UCA | Rclamp0531T-N | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | DFN1006 | DFN1006 | DFN1006 | DFN1006 — Form and fit match.; Rclamp0531T-N: Form and fit match. | |
| Voltage | 5.0V | 5.0V | 5.0V | 5.0V — Reverse working voltage matches.; Rclamp0531T-N: Reverse working voltage matches. | |
| Polarity | Bi-directional | Bi-directional | Bidirectional | Bi-directional / Bidirectional — Polarity matches (verified from datasheet).; Rclamp0531T-N: Polarity matches target. | |
| Capacitance | 0.05pF | 0.35pF | 0.5pF | 0.35pF / 0.5pF — Higher capacitance, may affect signal integrity.; Rclamp0531T-N: Significantly higher capacitance, may affect signal integrity. | |
| Power | Not specified | 100W | - | 100W — Higher peak pulse power rating. | |
| Current | Not specified | - | 3.5A | 3.5A — Peak pulse current is specified. |
Currently, no perfect alternative is known. Parts like Slkor's BV-FA05UCA are physically compatible but have higher capacitance (0.35pF vs 0.05pF), requiring careful testing in your application.