Is there a pin-compatible replacement for BM10B-SRSS-TB(LF)(SN)?

Yes, BM10B-SRSS-TBT(LF)(SN) is a pin-compatible replacement because it is the identical part. Other connectors may have similar specs but require careful verification of the PCB footprint and mating compatibility before use.

What risks should I check before replacing BM10B-SRSS-TB(LF)(SN)?

Before replacing, verify three key factors: 1) The mounting orientation is top-entry (vertical). 2) The PCB footprint matches exactly. 3) The header is mechanically compatible with the JST SR series mating housing.

BM10B-SRSS-TB(LF)(SN) Alternatives, Datasheet & Cross Reference | JST

BM10B-SRSS-TB(LF)(SN) is a 10-pin, 1.0mm pitch, top-entry SMT header from JST's SR series. Finding a compatible replacement requires matching the mechanical footprint and ensuring it mates with the SR series housing.

AI replacement insight

Package riskhigh

Non-JST parts require careful datasheet review to verify footprint and mating dimensions.

Electrical risklow

Most alternatives meet or exceed the voltage and current ratings.

Can it be replaced directly?

Yes, BM10B-SRSS-TBT(LF)(SN) is a direct, pin-for-pin replacement for BM10B-SRSS-TB(LF)(SN).

Best replacement path

Use the identical part number BM10B-SRSS-TBT(LF)(SN), which only differs by packaging and is fully compatible.

Main risk

When considering parts from other manufacturers, the primary risk is mechanical incompatibility, including the PCB footprint and the mating interface.

Recommended alternatives

This is the same JST connector in a different packaging format (tape and reel), making it a fully compatible drop-in replacement.

View details

Alternative comparison matrix

Feature / factor	BM10B-SRSS-TB(LF)(SN)	BM10B-SRSS-TBT(LF)(SN)	HC-1.0-10PLT	Compatibility / risk
Identity	BM10B-SRSS-TB(LF)(SN)	BM10B-SRSS-TBT(LF)(SN)	-	BM10B-SRSS-TBT(LF)(SN) — Identical part, differs only in packaging (Tape & Reel).
Orientation	Top-entry	Top-entry	Vertical SMT	Top-entry / Vertical SMT — matched; HC-1.0-10PLT: Matches target's top-entry orientation.
Current	0.7A	1.0A	1.0A	1.0A — Candidate current rating is higher.; HC-1.0-10PLT: Higher current rating is acceptable.
Series	JST SR Series	JST SR Series	Unknown, likely clone	JST SR Series / Unknown, likely clone — matched; HC-1.0-10PLT: Mating compatibility with JST SR series is not guaranteed.
Pitch	1.0mm	-	1.0mm	1.0mm — matched

Application & sourcing insights

Questions & answers

The best alternative is BM10B-SRSS-TBT(LF)(SN). It is the same component from JST, differing only in its tape-and-reel packaging, and is a direct drop-in replacement.