BSC093N15NS5
Infineon
Needs validationmedium risk
BSC093N15NS5 is a higher-voltage PG-TDSON-8 MOSFET candidate with loss and pinout checks.
Best Alternatives to BSC070N10NS3G
BSC070N10NS3G alternatives require electrical and pinout review. No verified drop-in replacement is supported by the provided data.
AI replacement insight
Electrical riskmedium
ID, RDS(on), Qg, and VGS(th) can differ.
Package riskmedium
Package matches, pinout is not proven.
Firmware risklow
Discrete MOSFET; no firmware interface.
Sourcing riskmedium
Lifecycle is incomplete for some candidates.
Can it be replaced directly?
Direct replacement for BSC070N10NS3G should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Best replacement path
Review BSC093N15NS5 first for voltage margin, then check losses, pinout, SOA, and gate drive.
Main risk
Pinout is not verified and key MOSFET ratings differ.
Recommended alternatives
2Alternative comparison matrix
| Feature / factor | BSC070N10NS3G | BSC093N15NS5 | BSC0805LS | BSC098N10NS5 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | PG-TDSON-8 | PG-TDSON-8 | PG-TDSON-8 | PG-TDSON-8 | PG-TDSON-8 — same listed package; BSC0805LS: same listed package; BSC098N10NS5: same listed package |
| Pinout | 8 pins | 8 pins | 8 pins | 8 pins | 8 pins — pin functions not shown; BSC0805LS: pin functions not shown; BSC098N10NS5: pin functions not shown |
| Voltage | 100V | 150V | 100V | 100V | 150V / 100V — passes 1.1x rule; BSC0805LS: fails 1.1x margin; BSC098N10NS5: fails 1.1x margin |
| Current | 90A | 87A | 79A | 60A | 87A / 79A / 60A — slightly lower rating; BSC0805LS: lower ID; BSC098N10NS5: large derating |
| Resistance | 7mΩ | 9.3mΩ | 7mΩ | 9.8mΩ | 9.3mΩ / 7mΩ / 9.8mΩ — more conduction loss; BSC0805LS: same nominal max; BSC098N10NS5: more heat |
Application & sourcing insights
Questions & answers
Verified drop-in options for BSC070N10NS3G are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.