Best Alternatives to CH340G

Package: SOP-16WCHInterface - SpecializedFunction: USB to UART BridgeInterface: USB 2.0 Full-SpeedBaud Rate: 50bps - 2MbpsSupply Voltage: 3.3V / 5VOperating Temperature: -40°C to 85°C

CH340G alternatives should be reviewed as interface IC substitutions, not simple passive swaps. Same-series CH340C and CH340B are candidates, but pinout and clocking must be checked.

AI replacement insight

Electrical riskmedium

Voltage matches, temp may not.

Package riskmedium

SOP-16 matches, pinout unknown.

Firmware riskmedium

USB ID/driver behavior needs check.

Sourcing risklow

Kept WCH parts are Active.

Can it be replaced directly?

Direct replacement for CH340G should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

Start with CH340C, then verify pinout, clock circuit, driver behavior, and temperature range.

Main risk

Pinout and clock-source differences can break a CH340G board.

Recommended alternatives

2
CH340C package
Needs validationmedium risk

CH340C is a same-series SOP-16 USB-serial candidate, but pinout, clock network, and temp range need review.

View details

Alternative comparison matrix

Feature / factorCH340GCH340CCH340BAlt 3Compatibility / risk
PackageSOP-16SOP-16SOP-16SOP-16 — same package text; CH340B: same package text
Pinout16 pins, G pinout16 pins, C pinout unknown16 pins, B pinout unknown16 pins, C pinout unknown / 16 pins, B pinout unknown — must verify pins; CH340B: must verify pins
InterfaceUSB 2.0 UARTUSB 2.0 serialUSB 2.0 Full-Speed UARTUSB 2.0 serial / USB 2.0 Full-Speed UART — same role; CH340B: same listed role
Voltage3.3V / 5V3.3V / 5V3.3V / 5V3.3V / 5V — same listed range; CH340B: same listed range
Temperature-40C to 85C-20C to 70C-20C to 70C-20C to 70C — lower temp range; CH340B: lower temp range

Application & sourcing insights

Questions & answers

Verified drop-in options for CH340G are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.