
STMicroelectronics
A strong alternative from STMicroelectronics with matching voltage, current, and a likely compatible SOT-89 package.
CJ78L15 is a 15V, 100mA linear voltage regulator in a SOT-89-3L package. This page provides analysis of potential replacements, including pin-compatible options and functional alternatives for various design needs.
Most alternatives are not drop-in compatible and require a board redesign. L78L15ABUTR has low package risk.
All candidates match the 15V output, and most offer equal or higher current, which is a safe margin.
These are simple linear regulators with no firmware.
Direct replacement for CJ78L15 should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
The most direct replacement path is L78L15ABUTR, which matches key specs and package type. Other options offer higher current but require a PCB redesign.
The main risk is package incompatibility. Most alternatives are in different packages (DPAK, TO-220) and are not drop-in replacements.

STMicroelectronics
A strong alternative from STMicroelectronics with matching voltage, current, and a likely compatible SOT-89 package.
| Feature / factor | CJ78L15 | L78L15ABUTR | L78M15CDT-TR | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | SOT-89-3L | SOT-89 | DPAK | SOT-89 / DPAK — Likely compatible, requires footprint verification.; L78M15CDT-TR: Different footprint requires board redesign. | |
| Voltage | 15V | 15V | 15V | 15V — matched; L78M15CDT-TR: matched | |
| Current | 0.1A | 0.1A | 0.5A | 0.1A / 0.5A — matched; L78M15CDT-TR: Higher current capability. | |
| Temperature | 0°C to 150°C | -40°C to 125°C | 0°C to 125°C | -40°C to 125°C — Wider low-end, but narrower high-end range.; L78M15CDT-TR: Narrower high-end range. | |
| Manufacturer | CJ | STMicroelectronics | - | STMicroelectronics — Cross-vendor. |
Verified drop-in options for CJ78L15 are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.