
FH (Guangdong Fenghua Advanced Tech)
Form-fit alternate with higher current rating and lower DCR, but has a wider inductance tolerance.
Reviewing alternatives for the CMI201209X100KT, a 10µH 0805 chip inductor. Key considerations for replacement are the ±10% tolerance, 15mA current rating, and physical 0805 package for a drop-in fit.
Wider tolerance (±20% vs ±10%) on most alternatives requires circuit validation.
Multiple candidates match the 0805 package, but functional alternatives require a redesign.
10µH 0805 inductors are a common component with many available sources.
No exact drop-in replacement with identical parameters was found. Several 0805 parts like CMP201209XD100MT are form-fit compatible but have a wider tolerance (±20% vs ±10%).
Use a form-fit candidate like CMP201209XD100MT, which offers higher current in the same 0805 package, but verify the impact of its wider ±20% tolerance.
The primary risk is the relaxed inductance tolerance (±20%) of most alternatives, which may affect filter performance in sensitive circuits.

FH (Guangdong Fenghua Advanced Tech)
Form-fit alternate with higher current rating and lower DCR, but has a wider inductance tolerance.
| Feature / factor | CMI201209X100KT | CMP201209XD100MT | MCL2012H100MT | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0805 | 0805 | - | 0805 (2012 Metric) — Same package and pin count. | |
| Inductance | 10µH | 10µH | - | 10µH — Inductance value matches. | |
| Tolerance | ±10% | ±20% | - | ±20% — Wider tolerance may affect circuit precision. | |
| Current | 15mA | 250mA | - | 100mA — Higher current rating. | |
| Dcr | 1.15Ω | 0.56Ω | - | 0.65Ω — Lower DCR improves efficiency. | |
| Temperature | -40°C to +85°C | -40°C to +85°C | - | -40°C to +125°C — Wider operating temperature range. | |
| Srf | 24MHz | - | 20MHz | 20MHz — Lower SRF than target's 24MHz min. |
The best alternative is likely CMP201209XD100MT. It matches the 0805 package, inductance, and temperature range while offering a much higher current rating (250mA) and lower DCR. However, you must verify if its wider ±20% tolerance is acceptable for your circuit.