Pricing

Best Alternatives to CMI322513U2R2KT

Package: 1210Guangdong Fenghua Advanced Technology Holding Co., Ltd.ChokesInductance: 2.2 µHTolerance: ±10%Rated Current: 500 mADC Resistance (RDC): 0.30 ΩQ Factor (min): 40

Finding a replacement for the CMI322513U2R2KT 2.2µH inductor requires careful review. While functional alternatives with higher current ratings exist, none are in a matching 1210 package, necessitating a PCB redesign and tolerance verification.

AI replacement insight

Package riskhigh

All candidates have different footprints (e.g., 3012, 2520, 3030) vs the target's 1210 package.

Electrical riskmedium

Candidates have weaker tolerance (±20% vs ±10%) and are a different inductor type (power vs multilayer).

Sourcing risklow

Candidates are active parts from major manufacturers like TDK and Sunlord.

Can it be replaced directly?

No direct, drop-in replacement has been identified for CMI322513U2R2KT. All reviewed alternatives are in different packages and require a PCB layout change.

Best replacement path

Redesign the PCB for a higher-current power inductor like TDK's VLS3012HBX-2R2M, after verifying the weaker ±20% tolerance is acceptable for the application.

Main risk

The primary risk is the package mismatch, which makes all candidates physically incompatible without a board redesign.

Recommended alternatives

6
VLS3012HBX-2R2M package
Needs validationhigh risk

TDK functional alternate with much higher current ratings but different package and weaker tolerance.

View details

Alternative comparison matrix

Feature / factorCMI322513U2R2KTVLS3012HBX-2R2MWIP252012P-2R2MLWPN201610U2R2MTY01Compatibility / risk
Package1210 (3.2x2.5mm)3030 (3.0x3.0mm)2520 (2.5x2.0mm)2016 (2.0x1.6mm)3030 (3.0x3.0mm) / 2520 (2.5x2.0mm) / 2016 (2.0x1.6mm) — Requires PCB redesign.; WIP252012P-2R2ML: Requires PCB redesign.; WPN201610U2R2MTY01: Requires PCB redesign.; WPN252010H2R2MT: Requires PCB redesign.
Tolerance±10%±20%±20%±20%±20% — May affect circuit precision.; WIP252012P-2R2ML: May affect circuit precision.; WPN201610U2R2MTY01: May affect circuit precision.; WPN252010H2R2MT: May affect circuit precision.
Current0.5A2.84A2.06A1.9A2.84A / 2.06A / 1.9A / 1.5A — Higher heat rating current (Itemp).; WIP252012P-2R2ML: Higher heat rating current (Irms).; WPN201610U2R2MTY01: Higher heat rating current (Irms).; WPN252010H2R2MT: Higher heat rating current (Irms).
Dcr Ohm0.3Ω0.106Ω--0.106Ω — Lower resistance, less power loss.
Saturation Current AUnknown3.35A--3.35A — Target Isat is unknown.

Application & sourcing insights

Questions & answers

No direct drop-in replacement has been found. If a PCB redesign is possible, TDK's VLS3012HBX-2R2M is a strong functional alternative with much higher current ratings, but you must verify the package fit and weaker tolerance.