DB128L-5.08-2P-GN-S
DORABO
Needs validationmedium risk
DB128L is a same-series screw terminal candidate but needs 10A UL derating.
Best Alternatives to DB128V-5.08-2P-GN-S
DB128V-5.08-2P-GN-S is a 2-position 5.08mm screw PCB terminal block. Alternatives need FAE review because pinout and current ratings are not fully verified.
AI replacement insight
Electrical riskmedium
Several candidates are below 16A UL.
Package riskhigh
Pinout and footprint drawings were not checked.
Firmware risklow
Passive connector; no firmware impact.
Sourcing risklow
Kept candidates are catalog matched.
Can it be replaced directly?
Direct replacement for DB128V-5.08-2P-GN-S should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Best replacement path
Check DB128L first if 10A UL is acceptable; otherwise verify WJ500V or DB2ERM mechanically.
Main risk
Footprint and current rating mismatch.
Recommended alternatives
4Alternative comparison matrix
| Feature / factor | DB128V-5.08-2P-GN-S | DB128L-5.08-2P-GN-S | WJ500V-5.08-2P | DB2ERM-5.08-2P-GN | Compatibility / risk |
|---|---|---|---|---|---|
| Package | PCB Terminal Block | Terminal Block | - | - | Terminal Block — package text differs |
| Pinout | 2P 5.08mm | 2P 5.08mm | - | - | 2P 5.08mm — pin map missing |
| Voltage | 300V UL | 300V UL | - | - | 300V UL — UL voltage equal |
| Current | 16A UL | 10A UL | - | - | 10A UL — needs derating |
| Interface | screw TH, 22-12AWG | screw TH, 22-12AWG | - | - | screw TH, 22-12AWG — from catalog/web |
Application & sourcing insights
Questions & answers
Verified drop-in options for DB128V-5.08-2P-GN-S are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.