DB128L-5.08-4P-GN-S
DORABO
Needs validationmedium risk
Same-series 4P 5.08mm TH screw block, but current rating and footprint need review.
Best Alternatives to DB128V-5.08-4P-GN-S
DB128V-5.08-4P-GN-S is a 4-position 5.08mm through-hole screw terminal block. Alternatives need footprint, pinout, and current-rating review.
AI replacement insight
Electrical riskmedium
some candidates are below 16A
Package riskhigh
pinout drawings not checked
Firmware risklow
passive connector
Sourcing riskmedium
lifecycle is not stated
Can it be replaced directly?
Direct replacement for DB128V-5.08-4P-GN-S should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Best replacement path
Start with DB128L-5.08-4P-GN-S, then verify footprint and 16A current suitability.
Main risk
Current rating and terminal-system differences are the main risks.
Recommended alternatives
4Alternative comparison matrix
| Feature / factor | DB128V-5.08-4P-GN-S | DB128L-5.08-4P-GN-S | DB2EVC-5.08-4P-GN | WJ2EDGVC-5.08-04P-14-00A | Compatibility / risk |
|---|---|---|---|---|---|
| Package | Through Hole | Through Hole | - | - | Through Hole — mount type matches |
| Pinout | 4P, footprint unknown | 4P, footprint unknown | - | - | 4P header — layout not checked |
| Voltage | 300V UL | 300V UL | - | - | 300V UL — ES rating matches |
| Current | 16A UL | 10A UL | - | - | 15A UL — slightly lower |
| Application | screw wire-to-board | screw wire-to-board | - | - | pluggable header — needs mating plug |
Application & sourcing insights
Questions & answers
Verified drop-in options for DB128V-5.08-4P-GN-S are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.