Is there a pin-compatible replacement for DB910-7.62-4P-GN-S?

No. While candidates with the same 4-position, 7.62mm pitch exist, their electrical ratings are lower and their exact PCB footprints have not been verified. They are not confirmed to be pin-compatible.

What risks should I check before replacing DB910-7.62-4P-GN-S?

The main risks are electrical and mechanical. You must verify that your application's current draw does not exceed the substitute's lower rating (e.g., 20A). You must also check the datasheet to confirm the PCB footprint matches.

DB910-7.62-4P-GN-S Alternatives, Datasheet & Cross Reference | Ningbo Dorabo Electric Co., Ltd.

Finding a substitute for the DORABO DB910-7.62-4P-GN-S requires careful attention to its high 30A current rating. While alternatives with the same 4-position, 7.62mm pitch exist, they typically offer lower current and wire gauge capabilities.

AI replacement insight

Electrical riskhigh

All candidates have significantly lower current ratings.

Package riskmedium

Footprints are likely similar but require datasheet verification to confirm pin-to-pin compatibility.

Can it be replaced directly?

No, there are no direct, drop-in replacements for the DB910-7.62-4P-GN-S in this list. All potential alternatives have a lower current rating and support a smaller wire gauge.

Best replacement path

DBT10-7.62-4P-GN-P is the closest parametric match, but it is a significant downgrade from 30A to 20A. No direct replacement was identified.

Main risk

The primary risk is electrical overstress. Using a substitute with a lower current rating (e.g., 20A vs 30A) can cause overheating, damage, or fire.

Recommended alternatives

A 4-position, 7.62mm pitch terminal block, but with a lower current rating (20A) and smaller wire gauge support.

View details

Alternative comparison matrix

Feature / factor	DB910-7.62-4P-GN-S	DBT10-7.62-4P-GN-P	WJ25C-B-7.62-04P-13-00A	Compatibility / risk
Positions	4	4	4	4 — Number of positions match.; WJ25C-B-7.62-04P-13-00A: Number of positions match.
Pitch Mm	7.62 mm	7.62 mm	7.62 mm	7.62 mm — Pin pitch matches.; WJ25C-B-7.62-04P-13-00A: Pin pitch matches.
Current	30 A	20 A	15 A	20 A / 15 A — Candidate current rating is lower.; WJ25C-B-7.62-04P-13-00A: Candidate current rating is 50% lower.
Wire Gauge	26-10 AWG	22-12 AWG	22-14 AWG	22-12 AWG / 22-14 AWG — Candidate supports a smaller wire gauge range.; WJ25C-B-7.62-04P-13-00A: Candidate supports a smaller wire gauge range.
Package	Terminal Block	Through Hole	Through Hole	Through Hole — Package footprint requires verification.; WJ25C-B-7.62-04P-13-00A: Package footprint requires verification.

Application & sourcing insights

Questions & answers

No direct replacement was found. The closest candidate is DBT10-7.62-4P-GN-P, but it's a downgrade with a 20A rating versus the original's 30A. This requires careful engineering review.